557205

Yamaha SPS-900 Manual

2
Zoom out
Zoom in
Previous page
1/12
Next page
2 En
■ ASSEMBLY
Before beginning assembly, check the parts list and make
sure all the parts are included.
You need a screwdriver for the assembly.
•
Parts list (for 2 units)
Attaching the spikes
When setting up this unit on a thick carpet etc., attach
spikes on the bottom side of the base in order to increase
stability of this unit and to enhance sound quality.
•
Attaching procedures
1.For each spike, screw a nut to the tip of the spike.
2.Screw the spike into the hole of the bottom side of
the base.
3.Place the base with the topside up in the desired
location and adjust the length of the spike to match
the depth of the carpet.
The tip of the spike may scratch or damage the flooring.
Please be careful when positioning the stand.
• Assembly procedures
Do not overtighten the screws. Doing so may damage screws or
screw holes.
1. Attach the base and the support.
Align holes in the base with holes in the support,
and then fasten 1 flat-head Phillips screws using a
screwdriver.
2. Attach the plate and the support.
Align holes in the plate with holes in the support,
and then fasten 2 flat-head Phillips screws using a
screwdriver.
When attaching the plate, put the plate with the spacer-side up on
the support.
3. Attach a speaker.
Align holes on the bottom of the speaker with holes
in the plate, and then fasten 3 speaker mounting
screws using a screwdriver.
The screw hole(s) which is (are) used varies (vary) depending on
the speaker. For details about the screw hole(s) which is (are)
used, refer to “USABLE SPEAKERS” on page 1.
4. Fix speaker cables.
Put 4 cable clamps into the conduit to fix speaker
cables after setting speaker cables into the conduit
on the back of the support.
NAME QUANTITY
1
Flat-head Phillips screws (M6 x 40 mm (1-9/16”))
6
2
Flat-head Phillips screws (M6 x 20 mm (13/16”))
6
3
Speaker mounting screws (M4 x 14 mm (9/16”))
4
4 Cable clamps 8
5 Spikes 8
6 Nuts 8
1
3
2
4
Example:
Soavo-2
Speaker
cable
Plate
Spacer
Support
Base
Assembly figure
Note
Note
Note
Note
6
5
1
2
Bottom side of the base
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha SPS-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha SPS-900 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info