557202
2
Zoom out
Zoom in
Previous page
1/2
Next page
ASSEMBLY FIGURE
ASSEMBLY PROCEDURES
Before beginning assembly, check the parts list and make sure all the parts are included.
ASSEMBLY PROCEDURES
(You will need a screwdriver for assembly.)
1. Attaching the base and support.
Pass the support through the hole from the bottom of the base,
and fasten the + self-binding tapping screws
1.
Fix the support so that the holes for the screws comes to the
rear side.
Do not overtighten the + self-binding tapping screws 1.
Doing so may damage the screws or assembly.
2. Attaching the pole and support.
Insert the pole to the support, and fasten the hexagon socket
set screws 2 into the three hole on the support using the
included wrench 5.
The line on the pole shows the limit of the stand height. Do
not use the stand pulling out the pole above from this line.
The hexagon socket set screw 2 of the lower side becomes
ineffective and the fixation becomes unstable.
3. Attaching the pads.
Put the pads 4 to the four corners on the bottom of the base to
prevent the stand from moving rickety.
4.
Attaching the gaskets.
Put the gaskets 6 to the both side of the plate.
5.
Wiring the speaker cables.
Insert the speaker cables to the hole on the plate, and aligned
them to the grooved part on the bottom of the base.
6. Attaching the speakers.
Line up the holes on the bottom of the speaker and the center
hole on the plate, and fasten the + binding screws 3.
In order to ensure that the speakers do not fall, always hold
the speakers while attaching the speakers.
PARTS LIST
NAME PARTS NOS.
QUANTITY
1 + self-binding tapping screws EP040090 12
(4 x 12)
2 Hexagon socket set screws VV249400 7
3 + self-binding screws (4 x 8) EG340360 4
4 Pads VV249200 8
5 Wrench (hexagonal) VV249500 1
6 Gaskets VV249300 4
Speaker
Speaker
cable
Pole
Limit of the stand
height
Plate
Support
Base
6
3
6
3
2
2
4
1
1
4
5
SPS-10MM(E)k 02.2.28 3:04 PM ページ 2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha SPS-10MM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha SPS-10MM in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info