548138
1
Zoom out
Zoom in
Previous page
1/2
Next page
AV Receiver/Receptor AV
Easy Setup Guide/Guía de conguración sencilla
English
Español
This document explains basic connections and unit settings.
For more information about this product, refer to the Owner’s Manual included on the supplied CD-ROM.
The latest Owner’s Manual can be downloaded from the following website.
http://download.yamaha.com/
Unless otherwise specified, an AV receiver that supports the 7.1-channel speaker system (U.S.A. model) is
used for illustrations of the main unit in this document.
Este documento describe las conexiones básicas y la configuración de la unidad.
Para obtener más información sobre este producto, consulte el Manual de Instrucciones que se incluye en el
CD-ROM suministrado.
Puede descargar el Manual de Instrucciones más reciente en el siguiente sitio Web.
http://download.yamaha.com/
A menos que se especifique de otro modo, en este documento se utilizará un receptor AV que admite el
sistema de altavoces de 7.1 canales (modelo de EE.UU.) para las ilustraciones de la unidad principal.
© 2014 Yamaha Corporation Printed in Malaysia ZK44510-1
RGLH
54
1
2
39
6 7
*
1
2
1
Accesorios empleados con este
documento
1
Mando a distancia
2
Pilas (AAA, R03, UM-4) (x2)
3
Micrófono YPAO
Se requieren los siguientes cables (no suministrados) para
crear el sistema descrito en este documento.
• Cables de altavoz (dependiendo del número de altavoces)
• Cable de audio con patillas (x1)
• Cables HDMI (x3)
• Cable de red
2
Colocación de los altavoces
Configure los altavoces en la sala utilizando el diagrama como
referencia.
1 Altavoz delantero (Izq.)
2 Altavoz delantero (Der.)
3 Altavoz central
4 Altavoz surround (Izq.)
5 Altavoz surround (Der.)
6 Altavoz surround trasero (Izq.)
*
7 Altavoz surround trasero (Der.)
*
9 Altavoz de subgraves
*
Receptores AV que admiten únicamente el sistema de
altavoces de 7.1 canales.
3
Conexión de los altavoces/altavoz
de subgraves
Únicamente modelos de EE. UU. y Canadá
Si conecta altavoces de 6 Ω, ajuste la impedancia de los
altavoces de la unidad en “6 Ω MIN”. Para más detalles,
consulte “Ajuste de la impedancia de los altavoces” en el
Manual de Instrucciones.
• Antes de conectar los altavoces, retire el cable de
alimentación de la unidad de una toma de CA y apague el
altavoz de subgraves.
• Asegúrese de que los hilos del núcleo del cable del altavoz
no se tocan entre sí o de que no entran en contacto con las
partes metálicas de la unidad.
Esto puede dañar la unidad o los altavoces. Si se produce
un cortocircuito en los cables de los altavoces, aparecerá
“Check SP Wires” en el visor delantero cuando se enciende
la unidad.
4
Conexión de dispositivos externos
5
Conexión de un enrutador para
conexión de red con cable
6
Conexión del cable de
alimentación a una toma de CA
Antes de conectar el cable de alimentación (sólo modelos
generales y de Taiwán)
Ajuste la posición del conmutador de VOLTAGE SELECTOR
(traducción en su idioma) según su tensión local.
Las tensiones son 110–120/220–240V CA, 50/60 Hz.
1
Accessories used with this
document
1
Remote control
2
Batteries (AAA, R03, UM-4) (x2)
3
YPAO microphone
The following cables (not supplied) are required to build the
system described in this document.
• Speaker cables (depending on the number of speakers)
• Audio pin cable (x1)
• HDMI cables (x3)
• Network cable
2
Placing speakers
Set up the speakers in the room using the diagram as a
reference.
1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
*
7 Surround back speaker (R)
*
9 Subwoofer
*
AV receivers that support the 7.1-channel speaker system
only.
3
Connecting speakers/subwoofer
U.S.A. and Canada models only
When connecting 6-ohm speakers, set the unit’s speaker
impedance to “6 Ω MIN”. For details, see “Setting the speaker
impedance” in the Owner’s Manual.
• Before connecting the speakers, remove the unit’s power
cable from the AC wall outlet and turn off the subwoofer.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
4
Connecting external devices
5
Connecting a router for wired
network connection
6
Connecting the power cable to an
AC wall outlet
Before connecting the power cable (Taiwan and General
models only)
Set the switch position of VOLTAGE SELECTOR according to
your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
EspañolEnglish
10° to 30°
Entre 10° y 30°
10° to 30°
Entre 10° y 30°
HDMI
HDMI
LAN
HDMI
HDMI HDMIHDMI
HDMI
HDMIHDMI
1 2
3 4
9
Subwoofer
Altavoz de subgraves
Use a subwoofer equipped
with built-in amplier.
Utilice un altavoz de
subgraves con un
amplicador incorporado.
5
Surround speaker (R)
Altavoz surround (Der.)
4
Surround speaker (L)
Altavoz surround (Izq.)
3
Center speaker
Altavoz central
2
Front speaker (R)
Altavoz delantero (Der.)
1
Front speaker (L)
Altavoz delantero (Izq.)
To an AC wall outlet
A una toma de CA
TV
Televisor
HDMI input
Entrada HDMI
HDMI output
Salida HDMI
HDMI output
Salida HDMI
BD/DVD player
Reproductor BD/DVD
Satellite/cable set top box
Reproductor digital multimedia
por cable/satélite
3
4
6
Audio pin cable
Cable de audio con clavija
VOLTAGE SELECTOR
(Taiwan and General models only)
(Sólo modelos generales
y de Taiwán)
The unit
La unidad
5
7
Surround back speaker (R)
Altavoz surround trasero (Der.)
6
Surround back speaker (L)
Altavoz surround trasero (Izq.)
Modem
Módem
Internet
Internet
Router
Enrutador
Network cable
Cable de red
AV receivers that support the 7.1-channel speaker system only.
Receptores AV que admiten únicamente el sistema de altavoces de 7.1 canales.
0.3 m (1 ft) or more
0,3 m o más
10 mm (3/8”)
10 mm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V477 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V477 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V477

Yamaha RX-V477 User Manual - English - 123 pages

Yamaha RX-V477 Quick start guide - English - 2 pages

Yamaha RX-V477 Quick start guide - German - 2 pages

Yamaha RX-V477 User Manual - German - 123 pages

Yamaha RX-V477 User Manual - Dutch - 123 pages

Yamaha RX-V477 Quick start guide - Dutch - 2 pages

Yamaha RX-V477 User Manual - French - 123 pages

Yamaha RX-V477 Quick start guide - French - 2 pages

Yamaha RX-V477 Quick start guide - French - 2 pages

Yamaha RX-V477 User Manual - Italian - 123 pages

Yamaha RX-V477 Quick start guide - Italian - 2 pages

Yamaha RX-V477 Quick start guide - Swedish - 2 pages

Yamaha RX-V477 User Manual - Swedish - 123 pages

Yamaha RX-V477 User Manual - Spanish - 123 pages

Yamaha RX-V477 Quick start guide - Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info