635411
95
Zoom out
Zoom in
Previous page
1/100
Next page
95
NOTE:
*1 By default (factory settings) the PSR-292 ordinarily functions as a 16-channel
multi-timbral tone generator, and incoming data does not affect the panel
voices or panel settings. However, the MIDI messages listed below do affect
the panel voices, auto accompaniment, and songs.
MIDI Master Tuning
System exclusive messages for changing the Reverb Type, Chorus Type,
and DSP Type.
*2 Messages for these control change numbers cannot be transmitted from the
PSR-292 itself. However, they may be transmitted when playing the accompa-
niment, song or using the Harmony effect.
*3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
This message automatically restores all default settings for the instrument,
with the exception of MIDI Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
This message allows the volume of all channels to be changed simulta-
neously (Universal System Exclusive).
The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are
ignored.)
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H
This message simultaneously changes the tuning value of all channels.
The values of “mm” and “ll” are used for MIDI Master Tuning.
The default value of “mm” and “ll” are 08H and 00H, respectively. Any val-
ues can be used for “n” and “cc.
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Refer to the Effect Map (page 97) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Refer to the Effect Map (page 97) for details.
<DSP Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H
mm : DSP Type MSB
ll : DSP Type LSB
Refer to the Effect Map (page 97) for details.
<DRY Level> F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H
ll : Dry Level
0m : Channel Number
<XG Parametter Change> F0H, 43H, 1nH, 4CH, hh, mm, ll, dd, F7H
hh mm ll : address
dd : data
<XG Bulk Dump> F0H, 43H, 0nH, 4CH, aa, bb, hh, mm, ll, dd, cc, F7H
0n : Device Number n=0 (send), 0 - f (receive)
aa bb : Byte Count (aa << 7) + bb
hh mm ll : address
dd : data
<Sequence Recording Bulk Dump>
F0H, 43H, 73H, 7FH, mID, 06H, 0AH, aa, bb, cc, dd, hh, mm, ll, bulk data, sum, F7H
mID : model ID PSR-292=2BH
06H : Bulk ID
0AH : Bulk No.
aa : Byte Count MSB
bb : Byte Count LSB
cc : amount of valid MSB data
dd : amount of valid LSB data
hh mm ll : address
bulk data : Sequence data (1byte, 2byte...7byte, MSB data)
sum : Check Sum = 0-sum (bulk data)
<One Touch Setting Bulk Dump>
F0H, 43H, 73H, 7FH, mID, 06H, 09H, aa, bb, cc, dd, hh, mm, ll, bulk data, sum, F7H
mID : model ID PSR-292=2BH
06H : Bulk ID
09H : Bulk No.
aa : Byte Count MSB
bb : Byte Count LSB
cc : amount of valid MSB data
dd : amount of valid LSB data
hh mm ll : address
bulk data : Sequence data (low 4bit, high 4 bit...low 4bit, high 4 bit)
sum : Check Sum = 0-sum (bulk data)
*4 When the accompaniment is started, an FAH message is transmitted. When
accompaniment is stopped, an FCH message is transmitted.When the clock is
set to External, both FAH (accompaniment start) and FCH (accompaniment
stop) are recognized.
*5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Value for “n” is ignored.
HINWEIS:
*1 Im Standardbetrieb (Werksvorgaben) funktioniert das PSR-292 gewöhnlich als
multi-timbraler 16Kanal- Klanggenerator, und eingehende Daten haben keinen
Einfluß auf die Bedienfeld-Stimmen und die Bedienfeld-Einstellungen. Die im
folgenden aufgeführten Befehle verändern jedoch dieBedienfeld-Stimmen, die
automatische Begleitung und die Songs:
MIDI Master Tuning
Systemexklusive Befehle zum Ändern von Reverb Type, Chorus Type und
DSP Type
*2 Befehle für diese Steuerbefehlsnummern können vom PSR-292 selbst nicht
gesendet werden. Sie können jedoch gesendet werden, wenn die Begleitung
oder Song gespielt oder der Harmonie-Effekt verwendet wird.
*3 Exclusive
<GM System ON> (GM-System AN) F0H, 7EH, 7FH, 09H, 01H, F7H
Durch diesen Befehl werden automatisch alle Werksvorgaben des Instru-
ments, mit Ausnahme von MIDI Master Tuning, wieder hergestellt.
<MIDI Master Volume> (MIDI-Gesamtlautstärke)
F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
Mit diesem Befehl kann die Lautstärke aller Kanäle gleichzeitig geändert
werden (Universal System Exclusive).
Die Werte für „mm“ werden für MIDI Master Tuning verwendet. (Werte für
„ll“ werden ignoriert.)
<MIDI Master Tuning> (MIDI-Grundstimmung)
F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H
Durch diesen Befehl wird der Stimmungswert für alle Kanäle gleichzeitig
geändert.
Die Werte von „mm“ und „ll“ werden für MIDI Master Tuning verwendet.
Der Standardwert beträgt für „mm“ 08H und für „ll“ 00H. Fürr „n“ und „cc“
können beliebige Werte verwendet werden.
<Reverb Type> (Reverb-Typ)
F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-Zuordnung (Seite 97).
<Chorus Type> (Chorus-Typ)
F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-Zuordnung (Seite 97).
<DSP Type> (DSP-Typ) F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H
mm : DSP Type MSB
ll : DSP Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-Zuordnung (Seite 97).
<DRY Level> (DRY-Pegel) F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H
ll : Dry Level
0m : Channel Number
<XG Parameter Change> F0H, 43H, 1nH, 4CH, hh, mm, ll, dd, F7H
hh mm ll : Adresse
dd : Daten
<XG Bulk Dump> F0H, 43H, 0nH, 4CH, aa, bb, hh, mm, ll, dd, cc, F7H
0n : Device Number n=0 (Übertragung), 0 - f (Empfang)
aa bb : Byte Count (aa << 7) + bb
hh mm ll : Adresse
dd : Daten
<Sequence Recording Bulk Dump>
F0H, 43H, 73H, 7FH, mID, 06H, 0AH, aa, bb, cc, dd, hh, mm, ll, bulk data, sum, F7H
mID : Model ID PSR-292=2BH
06H : Bulk ID
0AH : Bulk Nr.
aa : Byte Count MSB
bb : Byte Count LSB
cc : Anzahl gültiger MSB-Daten
dd : Anzahl gültiger LSB-Daten
hh mm ll : Adresse
bulk data : Sequenzdaten (1byte, 2byte...7byte, MSB-Daten)
sum : Prüfsumme = 0-sum (Bulk-Daten)
<One Touch Setting Bulk Dump>
F0H, 43H, 73H, 7FH, mID, 06H, 09H, aa, bb, cc, dd, hh, mm, ll, bulk data, sum, F7H
mID : Model ID PSR-292=2BH
06H : Bulk ID
09H : Bulk Nr.
aa : Byte Count MSB
bb : Byte Count LSB
cc : Anzahl gültiger MSB-Daten
dd : Anzahl gültiger LSB-Daten
hh mm ll : Adresse
bulk data : Sequenzdaten (low 4bit, high 4 bit...low 4bit, high 4 bit)
sum : Prüfsumme = 0-sum (Bulk-Daten)
*4 Beim Starten der Begleitung wird ein Befehl FAH gesendet. Beim Stoppen der
Begleitung wird ein Befehl FCH gesendet. Wurde für die Taktsteuerung
„External“ festgelegt, werden sowohl der Befehl FAH (Start der Begleitung) als
auch der Befehl FCH (Stopp der Begleitung) erkannt.
*5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Der Wert für „n“ wird ignoriert.
327
Feuille d’implémentation MIDI / Gráfica de implementación MIDI
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-292 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-292 in the language / languages: German as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PSR-292

Yamaha PSR-292 User Manual - English - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info