Para obter informações sobre como montar a mesa do teclado, consulte as instruções ao final deste manual.
IMPORTANTE – Verifique a sua fonte de alimentação –
Verifique se a voltagem de CA local corresponde à voltagem especificada na placa de identificação no painel inferior. Em algumas áreas, poderá ser fornecido um
seletor de voltagem, no painel inferior da parte traseira da unidade de teclado principal, ao lado do cabo de alimentação. Verifique se o seletor de voltagem está
configurado para a opção correta na sua área. O seletor de voltagem é configurado para 240V quando a unidade é inicialmente fornecida. Para alterar a configuração
use uma chave de fenda para girar o dial do seletor até que a voltagem correta apareça ao lado do ponteiro no painel.
Per informazioni sull'assemblaggio del supporto della tastiera, fate riferimento alle istruzioni alla fine del presente manuale.
IMPORTANTE – Controllate l'alimentazione –
Assicuratevi che la tensione di alimentazione CA locale corrisponda alla tensione specificata sulla piastrina del nome sul pannello inferiore. In alcuni Paesi può
essere previsto un selettore di tensione posto sul pannello inferiore dell'unità principale della tastiera, vicino al cavo di alimentazione. Assicuratevi che il selettore sia
impostato sulla tensione in uso nel vostro Paese. Alla spedizione, il selettore di tensione è impostato su 240 V. Per modificare l'impostazione, utilizzate un cacciavite
normale (a lama diritta) per ruotare il selettore fino a posizionarlo sulla tensione corretta, visualizzata accanto al puntatore presente sul pannello.
Raadpleeg de instructies achter in deze handleiding voor informatie over de montage van de standaard van het keyboard.
BELANGRIJK – Controleer de spanning –
Controleer of uw netspanning overeenkomt met het voltage dat op het plaatje staat dat u kunt vinden op het onderpaneel. In sommige landen wordt dit instrument
geleverd met een voltageschakelaar op het onderpaneel, bij de aansluiting voor het netsnoer. Zorg ervoor dat de voltageschakelaar is ingesteld op het juiste voltage.
De schakelaar staat op 240 V als het instrument vanuit de fabriek wordt verzonden. U kunt de instelling wijzigen met een platkopschroevendraaier. Hiervoor draait
u de schakelaar totdat het juiste voltage bij het pijltje verschijnt.
Informacje dotyczące montażu statywu instrumentu znajdują się w instrukcjach na końcu niniejszego podręcznika.
WAŻNE — Sprawdź zasilanie —
Należy się upewnić, że napięcie w gniazdach zasilania odpowiada wartościom napięcia podanym na tabliczce znamionowej, która znajduje się na spodniej płycie
instrumentu. W niektórych regionach na spodniej płycie instrumentu, pod klawiaturą, obok wejścia przewodu zasilającego może znajdować się wybierak napięcia. Należy
sprawdzić, czy wskazuje on napięcie używane w lokalnej sieci energetycznej. Wybierak napięcia jest fabrycznie ustawiony na wartość 240 V. Aby zmienić to ustawienie,
należy przy użyciu śrubokrętu płaskiego obrócić pokrętło wybieraka tak, aby odpowiednia wartość napięcia była wskazywana przez znacznik na obudowie instrumentu.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha H11 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha H11 in the language / languages: Portuguese as an attachment in your email.
The manual is 1,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
