484104
33
Zoom out
Zoom in
Previous page
1/36
Next page
Specifications
EMX512SC/EMX312SC/EMX212S
33
Note: All level control normally: Maximum level, Output impedance of signal generator :150 ohm
Input Characteristics
*1 0 dBu is referenced to 0.775 Vrms.
*2 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level.
(All level controls are at maximum position.)
*3 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*5 Phone Jacks are unbalanced.
Output Characteristics
*1 0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*2 Phone Jacks are unbalanced.
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify
products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please
check with your Yamaha dealer.
MIN TYP MAX UNIT
Power Consumption
EMX512SC 500
WEMX312SC 450
EMX212S 300
AC Cord Length 2450 2500 2550 mm
Dimensions
Height 284
mmDepth 264
Width 442.5
Net Weight 8kg
Included Accessories Power cord, Rubber stabilizers
× 2, Owner’s Manual
Options RACK MOUNT KIT (RK512), FOOT SW (FC5)
Input Terminals MIC/LINE
Actual
Load
Impedance
For Use with
Nominal
Input Level
Connector
Sensitivity *2
Nominal
( position)
Max. before
Clip
CH INPUT 1-4
XLR
MIC
2 k 50–600 Mics
–60 dBu
(0.775 mV)
–35 dBu
(13.8 mV)
–15 dBu
(138 mV)
XLR-3-31 type *3
LINE
–30 dBu
(24.5 mV)
–5 dBu
(436 mV)
+15 dBu
(4.36 V)
Phone
MIC
6 k 600 Lines
–50 dBu
(2.45 mV)
–25 dBu
(43.6 mV)
–5 dBu
(436 mV)
Phone Jack *4
LINE
–20 dBu
(77.5 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
CH INPUT
5/6, 7/8
XLR 2 k 50–600 Mics
–60 dBu
(0.775 mV)
–35 dBu
(13.8 mV)
–15 dBu
(138 mV)
XLR-3-31 type *3
Phone 10 k 600 Lines
–20 dBu
(77.5 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
Phone Jack *5
CH INPUT
9/10, 11/12
XLR 2 k 50–600 Mics
–60 dBu
(0.775 mV)
–35 dBu
(13.8 mV)
–15 dBu
(138 mV)
XLR-3-31 type *3
Pin 10 k 600 Lines
–20 dBu
(77.5 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
RCA Pin Jack
Output Terminals
Actual Source
Impedance
For Use with
Nominal
Output Level
Connector
Nominal Max. before Clip
SPEAKERS
[A1, A2, B1, B2]
0.1 4 Speakers
EMX512SC 125 W 500 W
[A1, B1] SPEAKON
[A2, B2] Phone Jack
EMX312SC 75 W 300 W
EMX212S 50 W 220 W
MAIN OUT [L, R] 600 10 k Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
EFFECT OUT 600 10 k Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
MONITOR OUT 600 10 k Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
REC OUT [L, R] 600 10 k Lines –10 dBV (316 mV) +10 dBV (3.16 V) RCA Pin Jack
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha EMX 512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha EMX 512 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info