30887
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
Reference
Troubleshooting guide
Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized
YAMAHA dealer or service center for instructions.
Reference pages are shown as black circled numbers 6.
Power
Operation
Sound
³Insert the AC mains lead securely into the household mains socket. 7
³To conserve power, the unit automatically switches to the standby mode after approx.
30 minutes elapse in the stop mode (Auto standby). Turn the power back to ON.
No power.
The unit is automatically switched
to the standby mode.
³Some operations may be prohibited by the disc.
³The unit may not be operating properly due to lightning, static electricity or some other external
factor.
Reset procedure:
Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON.
Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC
mains lead, and then reconnect it.
³Check the batteries are installed correctly. 4
³The batteries are depleted: Replace them with new ones. 4
³Point the remote control at the remote control sensor and operate. 4
³Condensation has formed: Wait 1 to 2 hours for it to evaporate.
³This unit cannot play discs other than DVD-Audio, DVD-Video, Video CD and CD. 5
³You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on
the rear panel. 5
³The disc may be dirty and may require cleaning. M
³Ensure that the disc is installed with the label of the side to be played facing upwards. ;
³An alternative language is not selected with discs which do not contain more than one language.
³In the case of some discs, the alternative language cannot be selected with [AUDIO] or
[SUBTITLE]. Try selecting it from the disc’s menu if one is available. ;
³Subtitles appear only with discs that contain them.
³Subtitles are cleared from the television. Display the subtitles. ?
³Some subtitles recorded around point A or B may fail to appear. B
³The language is not recorded on the disc.
³This function is dependent on software availability. Even if a disc has a number of angles
recorded, these angles may be recorded for specific scenes only. ?
³While stopped, press and hold ["] and [;] on the unit and then also press and hold [<] on
the unit until “Initialized” disappears from the television. Turn the unit off and on again.
All settings will return to the default values.
No response when buttons
pressed.
No operations can be performed
with the remote control.
Play fails to start even when
[1] (PLAY) is pressed.
Play starts but then stops
immediately.
Alternative languages fail to be
selected.
No subtitles.
Soundtrack and/or subtitle
language is not the one selected
with the SET UP menus.
Angle cannot be changed.
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
No sound.
Distorted sound.
³Check the connections. 7 8 9
³Check the volume on the equipment you have connected.
³Ensure that the input settings for the television and stereo system are correct.
³If you have connected this unit to an amplifier through the AUDIO OUT terminals, go to Audio in
the SET UP menus, and change “Speaker Setting” to suit your speakers. Select the large or small
icon for all the speakers you have connected. K
³Turn Virtual Surround off if it causes distortion. C
³Sound will only come from the 2 main speakers if Virtual Surround is on. Turn Virtual Surround off
if you are using three or more speakers. C
³While playing DVD-Audio that has video content, press [VIDEO OFF] to stop video output. >
³Due to the specifications on some types of televisions, both video and audio may be cut off when
you turn the VIDEO OFF feature on. >
³If the “D.MIX” indicator on the FL display goes out while playing a multi-channel DVD-Audio disc,
sound will only be output from speakers specified by the disc. Read the disc’s instructions for
details.
³“Error” on the FL display indicate that the track playing has been recorded with a nonstandard
system.
³If you have used analog connection (á page 6), go to the Audio menu and set “Digital Audio
Output” to “Off”. H
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DVDS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DVDS1200 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DVDS1200

Yamaha DVDS1200 User Manual - German - 68 pages

Yamaha DVDS1200 User Manual - Dutch - 68 pages

Yamaha DVDS1200 User Manual - French, Italian - 68 pages

Yamaha DVDS1200 User Manual - Swedish, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info