478469
86
Zoom out
Zoom in
Previous page
1/116
Next page
84 FTM-10R OPERATING MANUAL
TIME SYSTEM
You may select the Time System between “12H” and “24H” via the Menu mode.
1. Press the
[
VOL/SEL
]
key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
The display returns to the frequency display automatically if you leave an interval of
approximately three seconds before the next operation. Please operate the next step
within the 3 second interval.
2. Press and hold the
[
VOL/SEL
]
key for one second.
3. Rotate the DIAL knob to select the Menu Item “T4 12H/24H”.
4. Press the key momentarily. Then rotate the DIAL knob to select the desired Time
System.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
ALARM SET
You may set an alarm beep which will sound every “00” minutes via the Menu mode.
1. Press the
[
VOL/SEL
]
key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
2. Press and hold the
[
VOL/SEL
]
key for one second.
3. Rotate the DIAL knob to select the Menu Item “T2 CLOCK BP”.
4. Press the key momentarily. Then rotate the DIAL knob to change the setting to
ON”.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
To turn the alarm off again, select “OFF” in step 4 above.
INTERVAL BEEP
The FTM-10Rs Stop Watch Timer allows programming a timed interval when a beep will
sound and the white LED will flash.
1. Press the
[
VOL/SEL
]
key repeatedly to recall the Clock/Timer mode.
2. Press and hold the
[
VOL/SEL
]
key for one second to activate the Clock/Timer
Customization mode.
3. Rotate the DIAL knob to select Menu Item “T5 TMR BEEP”.
4. Press the key momentarily to enable selection of this Menu Item.
5. Rotate the DIAL knob to select the desired interval. Available selections are “5MIN
through “60MIN” (5MIN increment) or “OFF”.
6. Now, press the
[
VOL/SEL
]
key to save the new setting and exit to Clock/Timer mode.
To disable the interval timer, just repeat the above procedure, rotating the DIAL knob to
select “OFF” in step 5 above.
MISCELLANEOUS SETTING
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info