478469
82
Zoom out
Zoom in
Previous page
1/116
Next page
80 FTM-10R OPERATING MANUAL
MISCELLANEOUS SETTING
SCANNING BAND
By default, the FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur
Band to be independent bands while the scanner is activated. You may change scanner
operation so that both the 144 MHz Amateur Band and the 430 MHz Amateur Band are
scanned as one band.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F30 SCN CVRG”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desire mode.
IN BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Ama-
teur Band to be an independent band and scans these when the scan mode
is engaged. Activate the scanner on the 144 MHz Amateur Band only (or
430 MHz Amateur Band only).
HAM BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Ama-
teur Band to be one band and scans it when the scan mode is engaged.
Activate the scanner across the 144 MHz Amateur Band and 430 MHz
Amateur Band.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
SCAN-RESUME MODE
Three scan-resume modes are available on the FTM-10R:
BUSY: In this mode, the scanner will remain halted for as long as there is car-
rier present on the channel. After the carrier drops at the end of the other
station's transmission, scanning will resume.
HOLD: In this mode, the scanner will halt on a signal it encounters. It will not
restart automatically; you must manually re-initiate scanning if you wish
to resume.
TIME 3S/5S/10S: In these modes, the scanner will halt for the selected resume time, after
which scanning will resume (whether or not the other station is still
transmitting).
The default scan-stop mode is “BUSY”. To change the scan-resume mode, use the follow-
ing procedure:
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F32 SCN MODE”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to set the desired scan-resume mode.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info