478469

Yaesu FTM-10R Manual

75
Zoom out
Zoom in
Previous page
1/116
Next page
73FTM-10R OPERATING MANUAL
REPEATER OPERATION
The FTM-10R includes a host of convenient features that makes operation on amateur
repeaters both efficient and enjoyable.
The FTM-10R offers three methods of setting up split-frequency operation on repeaters:
Manual selection of preset repeater shifts (Standard Repeater Shift);
Automatic Repeater Shift (ARS), providing automatic activation of repeater shifts while
operating within designated repeater frequency subbands.
Independently stored transmit and receive frequencies (typically not corresponding to es-
tablished repeater frequency shifts).
Standard Repeater Shift
To activate the standard shift manually, you may use the Menu mode:
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F25 RPT
MODE”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select desired shift direction
(RPTR-, RPTR+, or RPTR OFF).
5. Press the
[
VOL/SEL
]
key momentarily to save the new setting and exit to normal op-
eration.
Your FTM-10R has been configured, at the factory, for the repeater offset customary in
your country. For the 144 MHz band offset will be 600 kHz; on the 430 MHz band, the
offset may be 1.6 MHz, 7.6 MHz, or 5 MHz (USA version). You can change the offset using
the following procedure, if needed for vacation travel or other purposes:
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F26 RPT SFT”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to set the desired offset. Note that
the resolution of the “Standard” repeater shift is to the near-
est 50 kHz multiple.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
Note: Do not use this procedure for programming of an “odd split” type repeater pair! The
process for programming odd splits is shown on page 42.
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info