478469
60
Zoom out
Zoom in
Previous page
1/116
Next page
58 FTM-10R OPERATING MANUAL
VOX SENSITIVITY
You may select the VOX sensitivity.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F47 VOX SENS”.
3. Press the key to enable selection of this Menu item.
4. Rotate the DIAL knob to select the desired sensitivity.
Available selections are “NORMAL”, “HIGH”, and “MAX”.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
LISTENING THE AM/FM BROADCAST STATION
1. Press the front panel / keys to switch the operating band to AM or FM.
2. Rotate the DIAL knob to select desired Broadcast station.
P When a signal is weak and difficult to hear, in some cases you may be able to hear better
by adjusting the squelch via the Menu Item “F38 SQL LEVL”. See page 31 for details.
P When using the optional BH-1 Bluetooth
®
Headset with the FEP-4 Ear Phone or an after-
market stereo speaker, you may enjoy stereo listening from the FM Stereo Broadcast
Station or External Audio Input via the Menu Item “F42 STEREO”. See page 87 for details.
P You may adjust the receiver audio responses via the Menu Item “F3 AF PITCH”. See
page 85 for details.
P You may set the Automatic Audio Volume Controller to allow the most comfortable
and/or effective reception in noisy environments via the Menu Item “F1 AF AUTO”.
See page 56 for details.
P You may set the Volume Setting Alert feature via the Menu Item “F4 AF PRESET”.
See page 86 for details.
Note: When receiving AM Broadcast stations, the receive sensitivity may be poor when
using an antenna designed with a matching system that is a low DC impedance be-
tween the center and shield of the coax. For better AM reception, use an antenna that
does not present a low DC resistance to ground.
TIME-OUT TIMER
(
TOT
)
The FTM-10R has the “Time-Out Timer” (TOT) feature that is designed to force the trans-
ceiver into the “receive” mode after a preset time of continuous transmission (the default is
“OFF”). This feature prevents your transceiver from transmitting a “dead carrier” for a long
time if the microphone PTT switch is accidentally locked in the “TX” condition. The Time-Out
Timer “switch-to-receive” time may be adjusted from 1 to 30 minutes, or Off via Menu Item.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F43 TOT”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired interval. Available selections are 1 to 30
minutes, or Off.
5. Press
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
When your transmission time is within 10 seconds of the Time-Out Timer expiration, an
alert bell will provide an audible warning from the speaker.
CONVENIENCE FEATURES
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info