478469
31
Zoom out
Zoom in
Previous page
1/116
Next page
29FTM-10R OPERATING MANUAL
PUBLIC ADDRESS FEATURE
The Public Address feature enables the output of your voice to the transceiver’s speaker.
When an optional MLS-200-M10 External Speaker is connected, the FTM-10R allows
the transceiver to be used as an 8 W Public Address system.
1. Press the top panel / key to select “PA”.
2. Press the key to activate the Public Address feature.
3. Press the PTT key, and speak into the microphone in a nor-
mal voice level.
U You may select the PTT key function via Menu Item “F23 PTT MODE”.
MOMENT: While pressing the PTT key, the audio is output from the speaker (fac-
tory default).
TOGGLE: Once the PTT key is pressed the audio is output from the speaker, and
when the PTT key is pressed once again, the audio output is off.
U Your voice is output to the speaker.
U The “P A” notation appears in the display while the Public Address is activated.
U Press the
[
VOL/SEL
]
key to adjust the volume (AF level) of the PA output. While
the RED LED is on, the volume level can be adjusted with the dial knob.
CAUTION!
When the function is changed to the radio mode, the volume level remains the same.
Please be careful about the volume level setting.
U You may adjust the audio output level by rotating the DIAL knob.
To disable the Public Address feature, repeat steps 1 and 2 above.
Note: Please be careful that the PA function does not cause any
inconvenience or disturbance for others in your area.
REVERSE FEATURE
(
Default “OFF” for USA version
)
The Reverse feature reverses transmit and receive frequencies while working through a
repeater.
It is often helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
1. Press the top panel / key to select “REVERSE”.
2. Press the key to activate the Reverse feature.
The “ ” or “ ” or “ ” icon will blink while “Reverse”
shift is activated.
3. Press the key again to revert to the “Normal” shift direction.
SMART MENU FEATURES
Graphic Bar
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info