674747
41
Zoom out
Zoom in
Previous page
1/140
Next page
Page 39FT
DX
1200 OPERATING MANUAL
CONVENIENCE FEATURES
SCOPE
This function displays a convenient spectrum scope for monitoring the band conditions. Both strong and weak signals
can be displayed in an easy-to-understand manner on the TFT screen. This multifunctional scope takes into consid-
eration the operators preference, by switching between the convenient C(1T(5 mode where the VF2 freTuency is
constantly in the center of the screen for monitoring conditions on both sides of your operating freTuency), and the FI;
mode, where the freTuency is ¿xed to the left side of the screen for convenience in monitoring in the band).
Note: Since the
FT
DX
1200
has only one receiver the audio will be muted while the spectrum scope is scanning.
1. Select an operating mode for the scope function,
either C(1T(5 or FI; mode.
ADVICE:
See the instructions on the next page for details on
individual operating modes.
. 3ress the
[
SCOPE
]
button momentarily to display
the scope screen.
Five different screens are shown on the TFT display
by pressing the
[
SCOPE
]
button.
A
DVICE:
'uring continuous sweeping, no audio will be heard.
Sweep speed can be changed in the 0enu item
125 SCOPE SPEED
”.
The received sound spectrum is displayed on
the $F-FFT screen. 3ress the
[
MONI
]
button to
display the received station’s transmission signal
spectrum.
2n the $F-FFT screen, either the “Spectrum 'is-
play” or the “Waterfall 'isplay” can be selected
in the 0enu item “
185 FFT DISPLAY MODE
”.
Sweep Mode
MANUAL mode
(ach time the
[
SELECT
]
button is pressed, a new
scan of the spectrum scope is shown on the TFT
display.
ASC (Automatic Spectrum-Scope Control) mode
3ress the
[
AUTO
]
button to access the $SC mode.
AUTO
” icon is indicated in red on the spectrum
scope display. While the 0$I1 'I$L is turned
slowly, the spectrum scope does not change. When
the 0$I1 'I$L is turned Tuickly the audio is
muted and the spectrum scope is scanned continu-
ally and displayed on the spectrum scope screen
until the 0$I1 'I$L is completely stopped. When
the spectrum scope scanning is stopped, the audio is
restored. The last scan is shown on the TFT display.
Listen to the station and slowly ¿ne tune the station.
A
DVICE:
By setting the “
126 SCOPE AUTO TIME
” menu mode,
sweeping can be carried out automatically at the pre-
set interval.
Continuous mode
3ress the
[
AUTO
]
button and hold for 1 second.
The audio is muted and the spectrum scope is
scanned continuously until the
[
AUTO
]
button is
pressed again.
Full screen spectrum scope display
Spectrum scope plus the AF-FFT display
(When the optional FFT unit is installed)
Spectrum scope Memory display
(When the Scope Memory stored)
5%12'
5%12'
#(((6
ÆÆÆÆ
5%12'
Spectrum scope display
#(((6
41


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info