Manual Yaesu FTDX-3000 (page 3 of 140) (English)

674750

Zoom out

Zoom in

1/140

Page 1

00 OperaTing Manual

General Description

Congratulations on the purchase of your Yaesu amateur

transceiver! If this is your rst rig, or if Yaesu equipment

is already the backbone of your station, rest assured

your transceiver will provide many hours of operating

pleasure for years to come.

The

3000

is an elite-class HF transceiver provid-

ing exceptional performance both on transmit and re-

ceive. The

3000

is designed for the most competi-

tive operating situations, whether you primarily operate

in contest, DX, or digital-mode environments.

Built on the foundation of the popular

9000

trans-

ceiver, and carrying on the proud tradition of the

FT-

1000

series, the

3000

provides up to 100 Watts

of power output on SSB, CW, and FM (25 Watts AM

carrier). Digital Signal Processing (DSP) is utilized

throughout the design, providing leading-edge transmit-

ter and receiver performance.

For exceptional protection from strong signal interfer-

ence, the optional RF µTuning Kits may be connected

via the rear panel. The RF µTuning Kits provide extraor-

dinarily sharp selectivity and protect your receiver from

close-in interference on a crowded band.

In the front end, you may select one of two RF pream-

pliers, or IPO (Intercept Point Optimization), providing

direct feed to the rst mixer. Three levels of RF attenua-

tion are available in 6-dB steps.

The

3000

receiver utilizes DSP ltering, incorpo-

rating many of the features of the

9000

, such as:

Variable Bandwidth, IF Shift, and Passband Contour

tuning. Also provided are Digital Noise Reduction, Digi-

tal Auto-Notch Filtering and a manually tuned IF Notch

lter.

On the transmit side, the Yaesu exclusive Three-Band

Parametric Microphone Equalizer allows precise and

flexible adjustment of the waveform created by your

voice and microphone. The audio Amplitude, Center

Frequency, and Bandwidth are adjusted separately for

the low, mid-range, and high-frequency audio spectrum.

The transmitted bandwidth may also be adjusted.

Advanced features include: Direct Keyboard Frequency

Entry and Band Change, Speech Processor, IF Monitor

for Voice modes, CW Pitch control, CW Spot switch,

Full CW QSK, CW Message Memory, adjustable IF

Noise Blanker, and all mode Squelch. Three TX/RX

antenna ports are provided on the rear panel. Two key

jacks are provided (one on the front and one on the rear

panel). The key jacks may be congured independently

for paddle input, connection to a straight key, or com-

puter-driven keying interface.

Frequency setup is straightforward on the

3000

Enter frequency directly for both VFO-A and VFO-B.

Separate keys are available for band selection. Each

band key provides three separate VFO settings for three

different parts of each band. You may create three inde-

pendent VFO settings of frequency, mode, and lter for

each band.

In addition, 99 memories are provided to store: Frequen-

cy, Mode, IF lter selection, Clarier offset, and Scan-

skip status. What’s more, five quick-recall (“QMB”)

memories can instantly store operational settings at the

push of a button.

The built-in antenna tuner includes 100 memories that

automatically store antenna matching settings for rapid,

later automatic recall.

Interfacing for digital modes is extremely simple with

the

3000

, thanks to the dedicated RTTY/PSK con-

nection jack on the rear panel. Optimization of the lter

passband, DSP settings, carrier insertion point, and dis-

play offset for digital modes, is possible via the Menu

programming system.

Advanced technology is only part of the

3000

story. Yaesu stands behind our products with a world-

wide network of dealers and service centers. We greatly

appreciate your investment in the

3000

, and we

look forward to helping you get the most enjoyment

from your new transceiver. Please feel free to contact

your nearest dealer, or one of Yaesu’s national headquar-

ters ofces, for technical advice, interfacing assistance,

or accessory recommendation. Watch Yaesu U.S.A.’s

Home Page for late-breaking information about Stan-

dard Horizon and Yaesu products: http://www.yaesu.

com.

Please read this manual thoroughly, to gain maximum

understanding of the full capability of the

3000

We thank you again for your purchase!

Is the Yaesu FTDX3000 internally protected from supply over voltage, please? Submitted on 23-5-2021 at 01:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX-3000 in the language / languages: English as an attachment in your email.

The manual is 37,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FTDX-3000 Manual

Product: