674740
142
Zoom out
Zoom in
Previous page
1/154
Next page
Page 140 FT-991 OperaTing Manual
installation of optional accessories
Setup the FT-991
The optional
FC-40
Automatic Antenna Tuner provides automatic tuning of a coaxial line to present nominal 50-ohm
impedance to the
FT-991
s ANT jack.
Before operation can begin, the
FT-991
microprocessor must be setup to accommodate the
FC-40
automatic tuner. This
is done using the Menu Mode:
Fc-40 externAl AutoMAtic AntennA tuner
(
For Wire AntennA
)
1. Press the
MENU(SETUP)
button to enter the Menu
mode.
2. Rotate the
MULTI
knob to select the Menu Item “
143
TUNER SELECT
”.
3. Touch
[
SELECT
]
on the LCD, then rotate the
MULTI
knob to select “
EXTERNAL
”.
MULTI Knob
MENU(SETUP) Button TUNE Button
81: %
670'4'5'%6.
'5'%6.
+
 /:6:/# 219'4 
0
/+
6'40#.



4. Touch
[
ENTER
]
on the LCD to save the new setting.
670'4'5'%6. ':6'40#.
81: %
'5'%6.
 /:6:/# 219'4 
/+


5. Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
Operation
1. Press the
TUNE
button briefly to activate the
Automatic Antenna Tuner.
2. The “
TUNER
” icon will appear in the TFT display.
3. Press and hold the
TUNE
button for one second
to begin automatic tuning. The transmitter will be
engaged, and the “
TUNER
” icon will blink while
tuning is in progress.
4. Tuning will stop automatically when a low SWR is
achieved. You may Press the
TUNE
button while
tuning is in progress, to cancel the automatic tuning.
5. To disable the Automatic Antenna Tuner, press the
TUNE
button briey again.
note:
r
Be sure to connect a good earth ground to the GND
terminal of the
FC-40
.
r
The carrier signal transmits continuously while
tuning is in progress. Please monitor the operating
frequency before beginning the tuning process. Be
sure you are not interfering with others who may
already be using the frequency.
r
It is normal to hear the sound of the relays while
tuning is in progress.
r
If the impedance cannot be matched by the
FC-40
better than 2:1, and the “
HI-SWR
” icon blinks, the
microprocessor will not retain the tuning data for that
frequency, as the
FC-40
presumes that you will want
to adjust or repair your antenna system to correct the
high SWR condition.
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info