674740
94
Zoom out
Zoom in
Previous page
1/154
Next page
Page 92
FT-991 OperaTing Manual
repeAter operAtion
The
FT-991
may be utilized on 29 MHz, 50 MHz, 144 MHz and 430 MHz repeaters.
1. Rotate the Main Tuning Dial knob to set the
FT-991
to the desired repeaters output frequency (downlink
from the repeater).
2. If CTCSS Tone operation is desired/needed, press
the
F(M-LIST)
button, then touch
[
TONE/DCS
]
on
the LCD to engage the CTCSS mode.
MULTI Knob
F(M-LIST) Button
3. Touch
[
TONE/DCS
]
on the LCD repeatedly to
select the desired CTCSS mode. If the repeater re-
quires an uplink encoding tone, select “
ENC
.” For
both uplink and downlink encode/decode operation,
choose “
CTCSS
”. The available choices are:
OFF
ENC
(Tone Encoder)”

CTCSS
(Tone Squelch)”
DCS
(Digital Code Squelch)”
OFF
4. Touch
[
RPT
]
repeatedly on the LCD to select the
desired repeater shift direction. The selections are:
SIMP
+
SIMP
where “
SIMP
” represents “Simplex” operation (not
used on a repeater).
5. Touch
[
FWD
]
to switch the display screen, and then
touch
[
TONE
]
. Rotate the
MULTI
knob to select
the desired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the CTCSS
Tone Chart).
6. Press and hold the microphone
PTT
switch to begin
transmission. You will observe that the frequency
has shifted to correspond to the programming set up
in the previous steps. Speak into the microphone in a
normal voice level. Release the
PTT
switch to return
to the receive mode.
Advice:
The conventional repeater shift used on 29 MHz is
100 kHz, while on the 50 MHz band the shift may
vary between 500 kHz and 1.7 MHz (or more). On
the 144 MHz band, the shift will be 600 kHz; on
the 430 MHz band, the shift will be 1.6 MHz or 7.6
MHz (5 MHz for the U.S.A. version). To program
the proper repeater shift, use Menu items
080
RPT SHIFT 28MHz
” (28 MHz), “
081 RPT SHIFT
50MHz
(50 MHz),
082 RPT SHIFT 144MHz
(144 MHz), and
083 RPT SHIFT 430MHz
” (430
MHz) as appropriate.
Press the
F(M-LIST)
button, then touch
[
REV
]
on
the LCD to reverse the transmission and reception
frequencies temporarily to check whether direct
communication with the partner station is possible.
When reversing the frequencies, + or will flash.
When
[
REV
]
is touched one more time, the reverse
is cancelled.
ctcSS tone Frequency
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1
- - - - - -
fM MoDe operation
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info