674740
82
Zoom out
Zoom in
Previous page
1/154
Next page
Page 80
FT-991 OperaTing Manual
Selecting the Keyer Operating Mode
The conguration of the Electronic Keyer may be customized independently for the front panel
KEY
jack of the
FT-991
. This permits utilization of Automatic Character Spacing (ACS), if desired. This allows the use of an
electronic keyer via the front jack and a straight key or computer-driven keying line via the rear panel jack.
1. Press the
MENU(SETUP)
button to engage the
Menu.
2. Rotate the
MULTI
knob to select Menu item “
012
KEYER TYPE
”.
3. Press the
[
SELECT
]
button, and then rotate the
MULTI
knob to set the keyer to the desired mode.
The available selections are:
OFF
: The built-in Electronic Keyer is
turned off (“straight key” mode).
BUG
: Dots will be generated automatically
by the keyer, but dashes must be sent
manually.
ELEKEY-A
: A code element (“Dot” or “Dash”
side) is transmitted upon releasing
both sides of the paddle.
ELEKEY-B
: Releasing both sides of the paddle
transmits the currently generated
“Dash” side followed by “Dot” side
(or reverse order).
ELEKEY-Y
: Pressing both sides of the paddle
transmits the currently generated
“Dash” side followed by “Dot” side
(or reverse order).
While transmitting the “Dash” side,
the first transmitted “Dot” side will
not be stored.
ACS
: Same as
ELEKEY
except that the
spacing between characters is pre-
cisely set by the keyer to be the same
length as a dash (three dots in length).
MULTI Knob
MENU(SETUP) Button
%9 6 
014
-';'46
9'+)*
;2' '.'-';$



-';'4 6&#5*1&
4. When the adjustments are complete, touch
[
EN-
TER
]
on the LCD to save the new setting.
-';'4 6&#5*1&
%9 6 
014
-';'46
9'+)*
;2' '.'-';#


5. Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
uSing the built-in electronic keyer
Morse
"E" & "T"
Morse
"E" & "T"
ACS
OFF
スペース
ACS
ON
Inter-character
Spacing too short
cw MoDe operation
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info