674740
65
Zoom out
Zoom in
Previous page
1/154
Next page
Page 63
FT-991 OperaTing Manual
PArAMetric Microphone equAlizer
(
SSb/AM Mode
)
The
FT-991
includes a unique Three-Band Parametric Microphone Equalizer that provides precise, independent con-
trol over the low, mid and treble ranges in the voice waveform. You may utilize one group of settings when the speech
processor is off and use an alternate group of settings when the speech processor is on. The speech processor feature is
described in the next chapter.
quick point:
The Parametric Equalizer is a unique technique for adjusting the signal quality. The three audio ranges may be adjusted
so precisely, it is possible to craft an audio response that provides a natural and pleasant sound that you may not have
ever experienced before. Alternately, the effective “talk power” can be signicantly enhanced.
The conguration aspects that may be adjusted on the Parametric Equalizer are:
Center Frequency: The center frequency of each of the three bands may be adjusted.
Gain: The amount of enhancement (or suppression) within each band may be adjusted.
Q: The bandwidth over which the equalization is applied may be adjusted.
Setup of the Parametric Microphone Equalizer
1. Connect the microphone to the
MIC
jack.
2. Set the RF output power to minimum value.
Advice:
We recommend that you connect a dummy load
to one of the Antenna jacks, and monitor your
signal on a separate receiver, to prevent interfer-
ence to other users.
You will have the best chance of hearing the ef-
fects of adjustments if you wear headphones
(connected to the separate monitor receiver)
while listening to your transmitted signal.
3. To adjust the Parametric Microphone Equalizer
while the speech processor is disabled, press the
F(M-LIST)
button, then touch
[
MIC-EQ
]
to select
ON
”.
5. Press the
MENU(SETUP)
button. The Menu list
will appear in the TFT display.
6. Rotate the
MULT
knob to nd the
EQ
” Menu area,
containing Menu items “
121
” through “
129
”; these
parameters apply to the adjustment of the Parametric
Microphone Equalizer when the speech processor
is disabled. Menu items “
130
” through “
138
” ap-
ply to the adjustment of the Parametric Microphone
Equalizer when the speech processor is engaged.
7. Touch
[
SELECT
]
on the LCD, then rotate the
MULT
knob to adjust a particular Menu item.
24/64% '3 '(4 3
24/64% '3 8.' '.
24/64% '3 6$9 *
1((


enhancinG transMit siGnal QualitY
MULTI Knob
MENU
(SETUP)
Button
F(M-LIST) Button
To adjust the Parametric Microphone Equalizer with
the speech processor engaged, press the
F(M-LIST)
button, then touch
[
PROC
]
to select “
ON
”.
4. Touch
[
MONI
]
, if you want to listen on the
FT-991
internal monitor.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info