478500
49
Zoom out
Zoom in
Previous page
1/76
Next page
Page 47FT-897D OPERATING MANUAL
SPECTRUM SCOPE MONITOR / SMART SEARCH
TM
SPECTRUM SCOPE MONITOR
OPERATION
The Spectrum Scope Monitor allows viewing of operating
activity on above and below your current frequency channel
in the VFO mode, or viewing of memory channel activity
on the current memory group when in the Memory mode.
When the Spectrum Scope Monitor is activated, the display
indicates the relative signal strength on channels immedi-
ately adjacent to the current operating frequency.
Using the Spectrum Scope
1. Set the transceiver to the VFO mode in the desired band
or within the desired memory group.
2. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“h”
[
SCOP, WID, STEP
]
appears on the display.
3. Press the
[
A
](
SCOP
)
key momentarily to engage the
Spectrum Scope.
When the Spectrum Scope is in operation, the relative
signal strength of stations on channels immediately ad-
jacent to the current frequency will be indicated on the
display.
4. While the Spectrum Scope is activated in the VFO mode,
press the
[
B
](
WID
)
key to change the visible bandwidth.
Available selections are ±10 (default), ±15, and ±63 chan-
nels. Press the
[
C
](
STEP
)
key to change the channel step
resolution. Available selections are shown bellow.
Mode Channel Steps (kHz)
CW, SSB, DIG 1.0 / 2.5 / 5.0
AM 2.5 / 5.0 / 9.0 / 10.0 / 12.5 / 25.0
FM, PKT
5.0 / 6.25 / 10.0 / 12.5 / 15.0 / 20.0 /
25.0 / 50.0
While the Spectrum Scope is activated, press and hold
in the
[
B
]
key for one second to change the Sweep mode.
This allows you to switch between “Scanner sweeps just
once” and “Scanner sweeps continuously (default).”
When the Spectrum Scope mode is in the “Scanner
sweeps just once” mode press and hold in the
[
A
]
key
for one second to restart the Sweep.
While the Spectrum Scope is activated, press and hold
in the
[
C
]
key for one second to enable the “Meter peak
hold” feature.
5. To disable the Spectrum Scope, press the
[
A
](
SCOP
)
key
once more.
The receivers audio output and S-meter are dis-
abled when using the Spectrum Scope.
SMART SEARCH
OPERATION
The Smart Search
feature automatically stores frequencies
where activity is encountered on the current band. When
Smart Search
is engaged, the transceiver quickly searches
above your current frequency, storing active frequencies as
it goes (without stopping on them even momentarily). These
frequencies are stored in a special Smart Search
memory
bank, consisting of 50 memories. This feature is available
on the FM and AM modes.
The Smart Search™ feature is especially helpful when trav-
eling, as you can instantly store active FM repeater frequen-
cies without having to look up the frequencies in a reference
book.
1. Set the SQL knob to the point where background noise
is silenced. A typical setting, for effective Smart Search
operation, will be at 12 o’clock or slightly clockwise from
this position.
2. Set the VFO to the frequency on which you wish to be-
gin the search (the Smart Search
feature is available on
the VFO mode only).
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row “f”
[
ARTS, SRCH, PMS
]
appears on the display.
4. Now press the
[
B
](
SRCH
)
key momentarily; the blink-
ing “SRCH” indicator will appear on the LCD, and the
transceiver will sweep upward on the current band, load-
ing channels on which it encounters a signal strong
enough to open the squelch. All channels where activity
is present (up to 50 channels) will be loaded into the
Smart Search
memories.
5. Now you can turn the MEM/VFO CH knob to select
from the just-stored Smart Search
memories. If you find
frequencies you wish to store into a “regular” memory,
just follow the procedures described previously; just
don’t press the
[
B
](
SRCH
)
key while storing these memo-
ries, because this will disable Smart Search
operation.
6. To disable Smart Search
operation, press the
[
B
](
SRCH
)
key momentarily.
The Smart Search™ memories are so-called
“soft” memories; they will be lost if you initiate
a new Smart Search™ sweep of the band.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info