478500
33
Zoom out
Zoom in
Previous page
1/76
Next page
Page 31FT-897D OPERATING MANUAL
SSB/AM TRANSMISSION
TRANSMITTER OPERATION
DSP Microphone Equalizer
In the SSB, AM, and FM transmission modes, you may use
the DSP system to change the frequency response of the
audio stage. This will allow you to roll off excessive high-
and/or low-frequency components of your voice’s audio char-
acteristics.
To set up the DSP Microphone Equalizer feature:
1. Press and hold in the
[
DSP
]
key for one second. This
instantly activates Menu Mode No-048
[
DSP MIC EQ
]
.
2. Rotate the DIAL to select one of the following equaliza-
tion choices:
OFF: Microphone Equalization Off
LPF: High Cut (lower frequencies are emphasized)
HPF: Low Cut (higher frequencies are emphasized)
BOTH: High/Low Cut (mid-range frequencies are em-
phasized)
3. When you have made your selection, Press and hold in
the
[
F
]
key for one second to save the new setting and
exit to normal operation.
AF Speech Processor Operation
The AF Speech Processor increases your average power
output while operating on SSB and AM modes.
1. Press the
[
F
]
key, as necessary,
to recall Multi Function Row “c”
[
STO, RCL, PROC
]
.
2. Press the
[
C
](
PROC
)
key to acti-
vate the AF Speech Processor. “Parentheses” will ap-
pear on both sides of the “PROC” indication.
3. Now press the PTT key (unless you have VOX enabled),
and speak into the microphone in a normal voice level,
as usual.
4. To deactivate the AF Speech Processor, again press the
[
C
](
PROC
)
key.
5. The Compression Level may be adjusted via the Menu,
as follows:
While still in Operating Function “c”
[
STO, RCL,
PROC
]
, press and hold in the
[
C
](
PROC
)
key for one
second. This instantly recalls Menu Mode No-074
[
PROC LEVEL
]
.
Rotate the DIAL to set a new level of Compression
(the default value is “50”).
When you have made your selection, press and hold
the
[
F
]
key for one second to save your new setting
and return to normal operation.
Make some on-the-air checks, or use a monitor re-
ceiver in your station, to ensure that good voice qual-
ity has been obtained via your adjustment.
Excessive advancement of the Compression
Level may lead to distortion. Each operators
voice pattern is different, so try several settings
to find the one which is best for your voice.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info