478499
102
Zoom out
Zoom in
Previous page
1/132
Next page
100 FT-857D Operating Manual
MENU MODE No•021
[
CLAR DIAL SEL
]
Function: Defines the SELECT knob to be used for setting of the clarifier offset fre-
quency.
Available Values: SEL, MAIN (Selector/Main Dial Knobs)
Default: SEL
MENU MODE No-022
[
CW AUTO MODE
]
Function: Selects whether the KEY jack shall be “Enabled” or “Disabled” while using the
SSB/FM modes.
Available Values: ON/OFF
Default: OFF
OFF:The KEY jack is enabled on the CW mode only.
ON: The KEY jack is enabled on all modes (SSB mode: A1, FM mode: F2). Thus, on SSB,
you can respond to a station asking for a CW QSO without having to change your FT-
857Ds Mode selection, if Menu #022 is set to “ON.”
MENU MODE No•023
[
CW BFO
]
Function: Sets the CW carrier oscillator injection side on the CW mode.
Available Values: USB/LSB/AUTO
Default: USB
USB: Injects the CW carrier oscillator on the USB side
LSB: Injects the CW carrier oscillator on the LSB side
AUTO: Injects the CW carrier oscillator on the LSB side while operating on the 10 MHz
band and below, USB side while operate on the 10 MHz band and up.
MENU MODE No-024
[
CW DELAY
]
Function: Sets the receiver recovery time during pseudo-VOX CW semi-break-in opera-
tion.
Available Values: FULL/30 ~ 3000 msec
Default: 250 msec
The recovery time may be adjusted in steps of 10 msec. A longer delay may be preferable if
you pause frequently while sending.
MENU MODE No•025
[
CW KEY REV
]
Function: Sets the keyer paddle’s wiring configuration.
Available Values: NORMAL/REVERSE
Default: NORMAL
NORMAL: Keyer paddle polarity is normal. The “tip” plug connection produces dots, and
the “ring” plug connection produces dashes.
REVERSE: Keyer paddle polarity is inverted. The “tip” paddle produces dashes, and the
“ring” paddle produces dots.
MENU OPERATION
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info