478499

Yaesu FT-857D Manual

93
Zoom out
Zoom in
Previous page
1/132
Next page
91FT-857D Operating Manual
Beacon Transmission (On the Air)
1. Press and hold in the
[
FUNC
]
key for one second to enter the Menu mode.
2. Rotate the SELECT knob to select Menu Mode No-012
[
BEACON TIME
]
.
3. Rotate the DIAL to select the interval time (between repeats of the message) (1 ~ 255
seconds).
4. Press and hold in the
[
FUNC
]
key for one second to exit to normal operation.
5. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “o”
[
PLY1, PLY2, PLY3
]
appears on the display.
6. Press the
[
A
]
(PLY1) key to activate the Beacon Feature.
1) When using the “beacon” feature, please disable the “VOX” feature.
2) If you press
[
B
](
PLY2
)
or
[
C
](
PLY1
)
, the message will be transmitted, after
which the transmission will halt. Operationally, these two keys function the same as a
traditional CW message keyer, while the
[
A
](
PLY1
)
key is used as the repetitive “bea-
con” text.
7. To stop a repeating beacon message, just press the
[
A
]
(PLY1) key momentarily.
8. To disable transmission from the Beacon, just repeat the above procedure, rotating the
DIAL to select “OFF” in step 3 above.
You may adjust the CW speed using Menu Mode No-030 [CW SPEED].
You may also send the Beacon Text manually. If this is done, all three “Beacon” messages
may be used as a traditional CW message keyer. To do this:
1. Press and hold in the
[
FUNC
]
key for one second to enter the Menu mode.
2. Rotate the SELECT knob to select Menu Mode No-012
[
BEACON TIME
]
.
3. Rotate the DIAL to select “OFF.”
4. Press and hold in the
[
FUNC
]
key for one second to exit to normal operation.
5. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “o”
[
PLY1, PLY2, PLY3
]
appears on the display.
6. Press the
[
A
]
(PLY1) key momentarily to send the “BEACON TEXT 1” message. Alterna-
tively, pressing the
[
B
]
(PLY2) or
[
C
]
(PLY3) key will initiate the message at those re-
spective break points.
MISCELLANEOUS SETTINGS
BEACON FEATURE
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info