478499

Yaesu FT-857D Manual

88
Zoom out
Zoom in
Previous page
1/132
Next page
86 FT-857D Operating Manual
PROGRAMMABLE MEMORY SCAN
(
PMS
)
OPERATION
To limit scanning (and manual tuning) within a particular frequency range, you can use the
Programmable Memory Scanning (PMS) feature, which utilizes five special-purpose memory
pairs (“M-P1L/M-P1U” through “M-P5L/M-P5U”). The PMS feature is especially useful in
helping you to observe any operating sub-band limits which apply to your Amateur license
class.
PMS setup is simple to accomplish:
1. Store the upper and lower frequency limits of the desired range into the PMS memory
pair (“M-PxL” and “M-PxU”), where the “U” channel represents the Upper frequency
limit, and the “L” channel represents the Lower frequency limit.
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “f”
[
ARTS, SRCH, PMS
]
appears on the display.
3. Press the
[
C
](
PMS
)
key. The “PMS-x” indication will appear at the upper left corner of
the LCD, signifying that the PMS feature is engaged. Tuning and scanning (by pressing
the
[
A
](
SCN
)
key on the Multi Function Row “g”
[
SCN, PRI, DW
]
) are now limited
within the range between the selected PMS memory pair, keeping operation inside this
programmed range.
Example: Limit tuning and scanning to the frequency range 144.30 - 148.00 MHz, to pre-
vent encroachment into the “Weak Signal” (SSB/CW) portion of the 2-meter band:
1. Press the
[
V/M
]
key, as necessary, to recall the VFO mode. Tune the SELECT or DIAL
knob to 144.300 MHz.
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily, then turn the SELECT knob to select memory
channel “M-P1L.”
4. Press and hold in the
[
A
](
MW
)
key for one second to write the VFO frequency into “M-
P1L.”
5. Now, tune the SELECT or DIAL knob to 148.000 MHz.
Press the
[
A
](
MW
)
key momentarily, then turn the SELECT knob to select memory
channel “M-P1U.”
6. Press and hold in the
[
A
](
MW
)
key for one second to write the VFO frequency into “M-
P1U.”
7. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob one click clockwise
to recall Multi Function Row “f”
[
ARTS, SRCH, PMS
]
.
8. Press the
[
C
](
PMS
)
key momentarily. Tuning and scanning are now limited to the 144.30
- 148.00 MHz range until you press the
[
V/M
]
key to return to memory or VFO opera-
tion.
SCANNING OPERATION
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info