478499
85
Zoom out
Zoom in
Previous page
1/132
Next page
83FT-857D Operating Manual
SCANNING OPERATION
Scan-Resume Choices
Scanning operation requires that you have the FT-857Ds audio squelched. The transceiver
then “assumes” that the opening of the squelch corresponds to the discovery of a signal you
may wish to listen to. Once the scan has been halted, one of three things may happen:
TIME (default action): In this mode, the transceiver pauses on the signal and stays locked on
its frequency for five seconds. Thereafter, scanning will resume
whether or not the other station’s transmission has ended. The pause
time is adjustable from 1 to 10 seconds via Menu Mode No-078
[
SCAN RESUME
]
.
BUSY: In this mode, the scanner will halt until the other station’s transmis-
sion ceases (at which point the squelch will close). One second after
the squelch closes, scanning resumes automatically.
STOP: In this mode, the scanner will find a signal, and lock on that fre-
quency without resuming the scan.
To choose the Scan-Resume mode:
1. Press and hold in the
[
FUNC
]
button for one second to activate the Menu mode.
2. Rotate the SELECT knob to recall Menu Mode No-001
[
EXT MENU
]
, then rotate the
DIAL to change the setting to “ON” to enable the extended Menu Mode.
3. Rotate the SELECT knob to select Menu Mode No-077
[
SCAN MODE
]
.
4. Rotate the DIAL knob to select the desired Scan-Resume mode.
5. Press and hold in the
[
FUNC
]
button for one second to exit the Menu mode.
Scan Skip Programming (Memory Mode Only)
Among the memories you have programmed, there may be some stations which you do not
wish to scan. For example, broadcast signals (which are transmitted continuously) will
cause the scanner to stop, and such channels may be skipped so as to avoid this inconve-
nience.
To remove a channel from the scanning loop:
1. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “b”
[
MW, SKIP, TAG
]
appears on
the display.
2. Recall the memory channel to be skipped.
3. Press the
[
B
](
SKIP
)
key momentarily. The “hyphen” in
the memory channel number will change to become a
dot;” this shows that this channel now is not included in
the scanning loop.
SCANNING OPERATION
[
Memory Skip “OFF”
]
[
Memory Skip “ON”
]
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info