478499
47
Zoom out
Zoom in
Previous page
1/132
Next page
45FT-857D Operating Manual
DSP CW PEAKING FILTER
(
DBF
)
In the CW mode, pressing the
[
C
](
DBF
)
key in Multi Function Row “p”
[
DNR, DNF, DBF
]
activates a narrow-bandwidth peaking filter, which may be ideal for use under very crowded
conditions. The DSP CW Peaking Filter also is especially helpful under VHF/UHF weak-
signal situations.
The center frequency of the DSP CW Peaking Filter is automatically aligned to be centered
on the response you have selected via the Menu Mode in item No-027
[
CW PITCH
]
. See
page 101 for details.
1. To change the bandwidth of the DSP CW Peaking Filter:
2. Press and hold in the
[
C
](
DBF
)
key for one second on the CW mode. This instantly
activates Menu Mode No-045
[
DSP BPF WIDTH
]
, which allows selection of the band-
width of the DSP CW Peaking Filter.
3. Rotate the DIAL to select the desired bandwidth. The available values are 60 Hz, 120
Hz, and 240 Hz (default value: 240 Hz).
4. When you have made your selection, press and hold in the
[
FUNC
]
key for one second
to save the new setting and return to normal operation.
DSP NOISE REDUCTION
(
DNR
)
The Noise Reduction feature of the DSP system may be used to enhance signal-to-noise
ratio on weak signals.
1. Press the
[
DSP
]
key momentarily. This instantly activates Multi Function Row “p”
[
DNR, DNF, DBF
]
.
2. Press the
[
A
](
DNR
)
key to activate the DSP Noise Reduction feature. The “” icon will
appear at the left side of the “DNR” indication, and the “ ” notation will appear at
the top on the display.
3. Now press and hold in the
[
A
](
DNR
)
key for one second. This instantly activates Menu
Mode No-049
[
DSP NR LEVEL
]
, which allows adjustment of the DSP Noise Reduction
level.
4. Rotate the DIAL to find the point where best signal-to-noise ratio is obtained under the
current noise conditions.
5. Press and hold in the
[
FUNC
]
key for one second to save the new setting and exit to
normal operation.
6. To turn off the DSP Noise Reduction feature, press the
[
A
](
DNR
)
key again.
If noise is present at a level which causes indication on the S-meter, the perfor-
mance of the Noise Reduction filter may be enhanced by rotating the SQL/RF
(RF Gain) control in a counter-clockwise direction so as to set the (fixed) S-meter read-
ing at the same level as the noise peaks. This adjustment raises the AGC threshold of the
receiver.
RECEIVER ACCESSORIES
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info