478499
16
Zoom out
Zoom in
Previous page
1/132
Next page
14 FT-857D Operating Manual
Do not allow disconnected cables to touch the case of your FT-857D transceiver or acces-
sories, as lightning can easily jump from the cable to the circuitry of your transceiver via
the case, causing irreparable damage. If a lightning storm is in progress in your immediate
area, do not attempt to disconnect the cables, as you could be killed instantly if lightning
should strike your antenna structure or a nearby power line.
If a vertical antenna is utilized, be certain that humans and/or pets and farm animals are kept
away both from the radiating element (to prevent electrical shock and RF exposure danger)
and the ground system (in the event of an electrical storm). The buried radials of a ground-
mounted vertical antenna can carry lethal voltages outward from the center of the antenna
in the event of a direct lightning strike.
RF FIELD EXPOSURE
This transceiver is capable of power output in excess of 50 Watts, so customers in the
United States may be required to demonstrate compliance with Federal Communications
Commission (FCC) regulations concerning maximum permissible exposure to radio fre-
quency energy. Compliance is based on the actual power output used, feedline loss, antenna
type and height, and other factors which can only be evaluated as a system.
Information regarding these regulations may be available from your Dealer, your local
radio club, from the FCC directly (press releases and other information can be found on the
FCC’s site on the World Wide Web at <http://www.fcc.gov>), or from the American Radio
Relay League, Inc. (225 Main St., Newington CT 06111 or <http://www.arrl.org>).
Although there is negligible radio frequency (RF) leakage from the FT-857D transceiver
itself, its antenna system should be located as far away from humans and animals as practi-
cable, so as to avoid the possibility of shock due to accidental contact with the antenna or
excessive long-term exposure to RF energy. During mobile operation, do not transmit if
someone is standing adjacent to your antenna, and use the lowest power possible.
Never stand in front of an antenna (during testing or operation) when RF power is applied,
especially in the case of 430 MHz directional arrays. The 20 Watt power output supplied by
the FT-857D, combined with the directivity of a beam antenna, can cause immediate heat-
ing of human or animal tissues, and may cause other undesirable medical effects.
ANTENNA CONSIDERATIONS
INSTALLATION
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info