478498
55
Zoom out
Zoom in
Previous page
1/84
Next page
53FT-817ND Operating Manual
Scan Skip Programming (Memory Mode Only)
Among the memories you have programmed, there may be some stations which you do not
wish to scan. For example, broadcast signals (which are transmitted continuously) will
cause the scanner to stop, and such channels may be skipped so as to avoid this inconve-
nience.
To remove a channel from the scanning loop:
1. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 2
[
MW, MC, TAG
]
appears on the display.
2. Recall the memory channel to be skipped.
3. Press the
(
MC
)
key momentarily. The “hyphen” in the
memory channel number will change to become a “dot”; this
shows that this channel now is not included in the scanning
loop.
4. Repeat steps 2 and 3 as many times as necessary to skip all the
channels you do not wish to scan.
5. Initiate memory scanning; you will observe that the channels
you marked to be skipped are not included in the scanning loop.
6. Press the PTT switch to stop the scan; you may now use the knob to step through
the channels manually - one at a time - and you will observe that the “Skipped” channels
are, nonetheless, available for recall by manual means.
7. You may restore a previously-skipped channel to the scanning loop by selecting the
channel manually, then pressing the
(
MC
)
key momentarily so that the “dot” changes
to become a “hyphen.”
SCANNING OPERATION
Scan-Resume Choices
Scanning operation requires that you have the transceivers audio squelched. The
transceiver then “assumes” that the opening of the squelch corresponds to the dis-
covery of a signal you may wish to listen to.
Once the scan has been halted, the transceiver pauses on the signal and stays locked
on its frequency for five seconds (default pause time). Thereafter, scanning will
resume whether or not the other station’s transmission has ended. The scan resume
interval can be set to 3/5/10 seconds, or off ( whereby scanning quits when a signal
is received) via Menu #41 (RESUME); see page 66 for details.
[
Memory Skip “OFF”
]
[
Memory Skip “ON”
]
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info