478498
23
Zoom out
Zoom in
Previous page
1/84
Next page
21FT-817ND Operating Manual
OPERATION
SETTING THE OPERATING FREQUENCY
1. In the “SSB/CW/DIG” modes, rotate the
knob to set the frequency. Clockwise
rotation of the knob increases the op-
erating frequency.
2. In the “AM/FM/PKT” modes, rotate the
knob to set the frequency. Clockwise rotation of the knob increases the operating
frequency.
3. You may also use the knob to adjust the operating frequency in the “SSB/CW/
DIG” modes. The knob provides faster tuning, ideal for making quick changes in
frequency when you want to move across the band in a hurry. You can then use the
knob to make fine frequency adjustments.
4. If you press the knob momentarily, then rotate the knob, you can now
change the operating frequency in 1 MHz steps, allowing very quick frequency excur-
sions. This can be particularly helpful on the VHF and UHF bands.
5. In step 2 above, it was mentioned that tuning in the “AM/FM/PKT” modes is accom-
plished using the knob. By default, the knob is disabled in these modes; if
you wish to enable the knob in these modes, use Menu #04; see page 60.
6. The synthesizer steps for the knob may be adjusted independently by mode. Use
Menu #06 for AM, #30 for FM, and #47 for SSB/CW/Digital. See pages 60, 64, and 67
for details.
The main knob synthesizers tuning rate (the number of steps per rotation
of the knob) can be adjusted using Menu #33. See page 65 for details.
STACKED VFO SYSTEM
1. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 1
[
A/B, A=B, SPL
]
appears on the display.
2. Now press the
(
A/B
)
key to toggle between the “A” and “B” VFOs. There are two
such VFOs provided on each Amateur band, so you may set VFO-A to the CW sub-
band, and VFO-B to the SSB sub-band, if you like. The operating mode will be pre-
served, along with the frequency information, on each VFO.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info