478498
13
Zoom out
Zoom in
Previous page
1/84
Next page
11FT-817ND Operating Manual
FNB-85 NI-MH BATTERY PACK INSTALLATION AND USE
INSTALLATION
Charging
Charging of the FNB-85 requires the use of either the supplied battery charger (NC-72B/
C or PA-48C/U), or an external 13.8 Volt (±15%) DC source. If the battery charger is used,
the FT-817ND must be turned off during charging; if an external 13.8 Volt DC source is
used (connected via the supplied E-DC-6 cable), then you may operate the FT-817ND while
charging is in progress.
1. Turn the FT-817ND off (see page 18), then connect the supplied battery charger DC
connector to the INPUT: 13.8V jack on the rear panel of the FT-817ND.
2. Plug the battery charger into the nearest AC wall outlet.
3. Press the FT-817ND’s switch for one second to turn the transceiver on.
4. Press the key momentarily.
5. Rotate the knob so that the function row containing “
[
CHG, VLT, DSP
]
” appears
on the display.
6. Press the key to select the
[
CHG
]
option (the display will immediately revert to the
regular frequency display).
7. Turn the FT-817ND off. You will now observe that the LED just
above the main tuning dial is glowing Orange, and the display
will indicate “CHG TIME RMN” and remaining time to indicate
the time remaining before a full charge is achieved on the FNB-
85.
Important Note
The NC-72/PA-48 are not designed to power the transceiver for operation (reception
or transmission).
Please be advised that the NC-72/PA-48 may contribute noise to TV and radio recep-
tion in the immediate vicinity, so we do not recommend its use adjacent to such devices.
Important Notice
For Charging the optional FNB-72 Ni-Cd Battery Pack
If you wish to charge the optional FNB-72 Ni-Cd Battery Pack using the supplied
NC-72B/C or PA-48C/U Battery Charger, you must set the Battery Charging Time
to “6 Hours” (use for NC-72B/C) or “8 Hours” (use for PA-48C/U) via Menu #11,
to prevent over charging the battery. See page 61 for detail.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info