478466
71
Zoom out
Zoom in
Previous page
1/84
Next page
69FT-7900R OPERATING MANUAL
MENU
(
“SET
)
MODE
REPEATER SETTING
Activates/deactivates the Automatic Repeater Shift feature.
Sets the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/DTMF SETTING
Setting the DCS code.
Selects “Normal” or “Inverted” DCS coding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Loading of the DTMF Autodialer Memories.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Sets the Synthesizer steps.
Sets the CTCSS Tone Frequency.
ARTS SETTING
Selects the ARTS beep mode.
Selects the Polling Interval during ARTS operation
Enables/disables the CW identifier during ARTS operation.
Stores your callsign into the CW identifier.
MEMORY SETTING
Toggle the display indication of the Memory/Home channel between
“frequency” and the channel’s “Alpha-numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory/Home channels.
SCAN SETTING
Enables/Disables the Priority Revert feature.
Selects the Smart Search Sweep mode.
Selects the Scan-Resume mode.
Selects the Memory Scan channel-selection mode.
Selects what action will happen on a “flagged” Memory Channel.
Enables/disables the Weather Alert Scan.
POWER SAVE SETTING
Selects the Automatic Power Off time (time before power goes off).
Sets the Time-Out Timer.
DISPLAY SETTING
Setting of the Display brightness level.
SWITCH/KNOB SETTING
Enables/disables the beeper
Selects the alternate function (press and hold in) of the
[
TONE
(
HM/RV
)]
key and primary function (press momentarily) of the
[
V/M
(
MW
)]
key.
Selects the Control Locking lockout combination.
Programming the alternate (press and hold in) function of the front panel’s
[
LOW
(
ACC
)]
key.
Programming the microphone’s
[
P1
]
/
[
ACC
]
button assignment.
Programming the microphone’s
[
P2
]
/
[
P
]
button assignment.
Programming the microphone’s
[
P3
]
/
[
P1
]
button assignment.
Programming the microphone’s
[
P4
]
/
[
P2
]
button assignment.
WIRES SETTING
Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WiRES
TM
operation.
Selects the Access Number (DTMF code) for non-WiRES
TM
Internet Link
System access.
MISCELLANEOUS SETTING
Shifting of CPU clock frequency.
Enables/Disables the Band-edge beeper while selecting the frequency
by the DIAL knob.
Enables/disables the Automatic Writing feature for the Hyper Memory.
Selects the microphone type to be used.
Enables/disables the microphone input during Packet operation.
Sets the transceiver’s circuitry for the Packet baud rate to be used.
Adjust the RF SQL threshold level.
Selects the Receiving mode.
Selects or disables the VFO band edge limiting for the current band.
Reducing the MIC Gain (and Deviation).
SET MODE ITEM
4 ARS
33 RPT.MOD
39 SHIFT
SET MODE ITEM
9 DCS.COD
10 DCS.N/R
12 DT DLY
13 DT SPD
14 DT WRT
41 SPLIT
42 SQL.TYP
43 STEP
44 TN FRQ
SET MODE ITEM
2 AR BEP
3 AR INT
7 CWID
8 CW WRT
SET MODE ITEM
23 NAME
24NM WRT
SET MODE ITEM
34 PRI.RVT
36 S SRCH
37 SCAN
38 SCN MD
40 SKIP
48 WX ALT
SET MODE ITEM
1 APO
45 TOT
SET MODE ITEM
11 DIMMER
SET MODE ITEM
5 BEEP
16 HM/REV
21 LOCK
27 PRG.PNL
28 PRG P1(ACC)
29 PRG P2(P)
30 PRG P3(P1)
31 PRG P4(P2)
SET MODE ITEM
18 I NET
19 INT CD
20 INT MR
SET MODE ITEM
6 CLK.SFT
15 EDG.BEP
17 HYPER
22 MIC
25 PKT.MIC
26 PKT.SPD
32 RF SQL
35 RX MOD
46 VFO.BND
47 WID.NAR
AVAILABLE VALUES
(
DEFAULT
)
ARS.ON/ARS.OFF
ÚÚ
ÚÚ
Ú
RPT.OFF/RPT. --/RPT.+
ÚÚ
ÚÚ
Ú
0.00 ~ 99.95 MHz
ÚÚ
ÚÚ
Ú
AVAILABLE VALUES
(
DEFAULT
)
104 Standard DCS codes
(
023
)
TRX N/RX R/TX R/TRX R
50MS/100MS/250MS/450MS/
750MS/1000MS
50MS/75MS/100MS
---
SPL.OFF/SPL.ON
OFF/ENC/ENCDEC/REV TN/DCS
AUTO/ 5.0 k/10.0 k/12.5 k/15.0 k/
20.0 k/25.0 k/50.0 k/100 k
50 Standard CTCSS Tones
(
100Hz
)
AVAILABLE VALUES
(
DEFAULT
)
INRANG/ALWAYS/OFF
25sec/15sec
TX ON/TX OFF
---
AVAILABLE VALUES
(
DEFAULT
)
FREQ/ALPHA
---
AVAILABLE VALUES
(
DEFAULT
)
RVT.ON/RVT.OFF
SINGLE/CONT
TIME/BUSY/HOLD
MEM/ONLY
OFF/SKIP/MEM
ALT.ON/ALT.OFF
AVAILABLE VALUES
(
DEFAULT
)
OFF/0.5 H ~ 12.0 H
1 ~ 30 minutes or OFF
(
6 minutes
)
AVAILABLE VALUES
(
DEFAULT
)
DIM 1/DIM 2/DIM 3/DIM.OFF
AVAILABLE VALUES
(
DEFAULT
)
KEY/KEY+SC/OFF
REV/HOME
LK KEY/LK DIAL/LK K+D/LK PTT/
LK P+K/LK P+D/LK ALL
WX/REV/RPTR/SQ.OF/LOCK/DIM
SQ.OF/TCAL/SSCH/ARTS/TN.FQ/
DCSC/WX/RPTR/PRI/LOW
(
#31
)
/
TONE
(
#30
)
/MHz/REV/HOME/
BAND
(
#28
)
/V/M
(
#29
)
/SCAN
AVAILABLE VALUES
(
DEFAULT
)
INT.COD/INT.MEM
CODE 0 ~ 9/A/B/C/D/E/F
(
CODE 1
)
d-1 ~ d-16
AVAILABLE VALUES
(
DEFAULT
)
SFT.ON/SFT.OFF
BEP.ON/BEP.OFF
MANUAL/1-AUTO/AUTO
MH-48/MH-42
MIC.ON/MIC.OFF
1200bps/9600bps
OFF/S-2/S-3/S-4/S-5/S-6/S-7/S-8/
S-9/S-FULL
AUTO/FM/AM
BND.ON/BND.OFF
WIDE/NARROW
ÚÚ
ÚÚ
Ú
:
Depends on the band of operation.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7900R in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info