478466
60
Zoom out
Zoom in
Previous page
1/84
Next page
58 FT-7900R OPERATING MANUAL
The FT-7900R can be used to access a repeater or base station which is configured to
provide access to the Vertex Standard WiRES
TM
(Wide-Coverage Internet Repeater Enhance-
ment System) operating in the “SRG” (“Sister Radio Group”) mode.
1. Press the
[ (
L
)]
key momentarily to activate the
WiRES
TM
access capability. The “ ” icon will appear
on the display.
2. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second
to enter the Set mode.
3. Rotate the DIAL knob to select Menu #19 (
INT CDINT CD
INT CDINT CD
INT CD).
4. Press the
[
BAND
(
SET
)]
key momentarily, then rotate the DIAL knob to select the ac-
cess number (
CODECODE
CODECODE
CODE
00
00
0” ~ “
99
99
9”, “
AA
AA
A”, “
BB
BB
B”, “
CC
CC
C”, “
DD
DD
D”, “
EE
EE
E (¼)”, or “
FF
FF
F (#)”) corresponding
to the WiRES
TM
repeater you wish to establish an Internet
link with (ask your repeater owner/operator if you don’t
know the access numbers of the network).
5. Press the
[
BAND
(
SET
)]
key momentarily to lock in the selected access number, then
press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
6. With the WiRES
TM
capability activated (as in step 1 above), the FT-7900R will generate
a brief (0.1 second) DTMF tone according to your selection in step 4. This DTMF tone
is sent at the beginning of every transmission to establish or maintain the link to the
remote WiRES
TM
repeater.
7. To disable the WiRES
TM
access capability, press the
[ (
L
)]
key again.
You may access other Internet Linking Systems (including WiRES™ in the “FRG” mode)
that use a DTMF string for access.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #14 (
DT WRTDT WRT
DT WRTDT WRT
DT WRT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then load the
DTMF tones which you wish to use to establish an
Internet link (ask your repeater owner/operator if you don’t know the access numbers in
the network) into the desired DTMF Memory channel.
1) Rotate the DIAL knob to select the DTMF Autodialer
memory channel number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”).
2) Press the
[
BAND
(
SET
)]
key momentarily.
3) Rotate the DIAL knob to select the DTMF code, then
press the
[
BAND
(
SET
)]
key momentarily to move
the digit.
4) Repeat step (3) above to complete the DTMF string.
5) Press and hold the
[
BAND
(
SET
)]
key for 1/2 sec-
ond to save the new setting, then press and hold the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal
INTERNET CONNECTION FEATURE
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7900R in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info