478466

Yaesu FT-7900R Manual

35
Zoom out
Zoom in
Previous page
1/84
Next page
33FT-7900R OPERATING MANUAL
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Memory Storage
1. Select the desired frequency, while operating in the VFO mode. Be sure set up any de-
sired CTCSS or DCS tones, as well as any desired repeater offset. The power level may
be also be set at this time, if you wish to store it.
2. Press and hold in the
[
V/M
(
MW
)]
key for 1/2 second. A
memory number will appear (blinking) on the display.
3. Within ten seconds of pressing the
[
V/M
(
MW
)]
key, use
the DIAL knob or the microphone’s
[
UP
]
/
[
DWN
]
buttons to select the desired memory
channel for storage (if the channel is already occupied by data stored previously, the
“channel frequency” notation will appear on the display).
4. To attach an alpha/numeric name “Tag” to the memory,
press and hold in the
[
V/M
(
MW
)]
key for 1/2 second,
then proceed to the next step; otherwise press the
[
V/M
(
MW
)]
key momentarily to save the entry and exit to normal operation.
To Append an Alpha-numeric “Tag” to a Memory
1. After pressing and holding in the
[
V/M
(
MW
)]
key in
step 4 above, rotate the DIAL knob to select the first
character in the name you wish to store, the press the
[
BAND
(
SET
)]
key momentarily to move on to the next character. Letters, numbers, and
symbols are available for storage.
2. Again rotate the DIAL knob to select the desired letter, number, or symbol, then press the
[
BAND
(
SET
)]
key momentarily to move on to the next character’s slot. If you make a
mistake, press the microphone’s
[
DWN
]
button to move
back to the previous character’s slot, then re-select the
correct letter, number, or symbol.
3. Repeat the above step to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
4. When you have completed the creation of the label, press
and hold in the
[
BAND
(
SET
)]
key for 1/2 second to
save the label and exit to normal operation.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7900R in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info