36015
66
Zoom out
Zoom in
Previous page
1/80
Next page
64 FT-7800R OPERATING MANUAL
You can transfer all data stored in one FT-7800R to another FT-7800R by utilizing the
handy “Cloning” feature. This requires a user-constructed Cloning cable which connects the
DATA jacks on the two transceivers, as shown below.
To clone from one transceiver to another, use the following procedure:
1. Insert the Cloning Cable into the DATA jack of each transceiver.
2. Turn both transceivers off, then press and hold in the
[
MHz
(
PRI
)]
key on each radio
while turning the power on again.
3. Rotate the DIAL knob on each radio to select (F-7 CLONE), then press and hold in the
[
BAND
(
SET
)]
key. The display will disappear for a
moment, then the “CLONE” notation will appear on the
display.
4. On the “destination” radio, press the
[
LOW
(
ACC
)]
key.
The “
--
RX
--
” indicator will appear on the display.
5. Now, on the “Source” radio, press the
[
V/M
(
MW
)]
key.
The “
--
TX
--
” indicator will appear on the display, and
the cloning data transfer will immediately begin.
6. If there is a problem during the cloning process, “ER-
ROR” will be displayed. Check your cable connections,
and try again.
7. If cloning was successful, “CLONE” will reappear on both displays.
8. Turn both transceivers off, then remove the Cloning Cable. Channel and operating data
for both radios are now identical. They both may be turned on now for normal operation.
CLONING
13.8VDC
ANT
EXT SP
DATA
13.8VDC
ANT
EXT SP
DATA
PKS
GND
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info