36015
39
Zoom out
Zoom in
Previous page
1/80
Next page
37FT-7800R OPERATING MANUAL
Memory Bank Recall
1. Set the radio to the Memory mode by pressing the
[
V/M
(
MW
)]
key, if necessary.
2. Press and hold in the
[
SCAN
(
SEL
)]
key for 1/2 sec-
ond, then rotate the DIAL knob to select the Memory
Bank (“BANK 1” ~ “BANK20”).
3. Press the
[
BAND
(
SET
)]
key momentarily to lock in the selected Memory Bank.
4. In the Memory Bank mode of operation, you can only select memory channels within the
current Memory Bank.
5. To change the Memory Bank to another Bank, press and hold in the
[
SCAN
(
SEL
)]
key
for 1/2 second; now rotate the DIAL knob to select the new Memory Bank, then press the
[
BAND
(
SET
)]
key momentarily to lock in the new Memory Bank.
6. To exit from Memory Bank operation, press and hold in
the
[
SCAN
(
SEL
)]
key for 1/2 second, then rotate the
DIAL knob to select “NOBANK;” now press the
[
BAND
(
SET
)]
key momentarily.
Deleting a Memory Channel from a Memory Bank
1. In the Memory Bank mode, recall the memory channel to be deleted from the Memory
Bank.
2. Press and hold in the
[
SCAN
(
SEL
)]
key for 1/2 second, then press and hold in the
[
V/M
(
MW
)]
key for 1/2 second. The channel will now be deleted from the Memory
Bank, but the memory register itself will still be available in the non-Bank mode.
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events where a number of operators may be using the radio for
first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode:
1. Turn the radio off.
2. Press and hold in the
[
MHz
(
PRI
)]
key while turning the radio on.
3. Rotate the DIAL knob to select the (F-6 M-ONLY) op-
tion, then press and hold in the
[
BAND
(
SET
)]
key for
1/2 second.
To return to normal operation, repeat the above steps.
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info