36015

Yaesu FT-7800 Manual

32
Zoom out
Zoom in
Previous page
1/80
Next page
30 FT-7800R OPERATING MANUAL
TONE SEARCH SCANNING
In operating situations where you don’t know the CTCSS or DCS tone being used by an-
other station or stations, you can command the radio to listen to the incoming signal and
scan in search of the tone being used. Two things must be remembered in this regard:
You must be sure that your repeater uses the same tone type (CTCSS vs. DCS).
Some repeaters do not pass the CTCSS tone; you may have to listen to the station(s)
transmitting on the repeater uplink (input) frequency in order to allow Tone Search Scan-
ning to work.
To scan for the tone in use:
1. Set the radio up for either CTCSS or DCS Decoder operation (see the previous discus-
sion). In the case of CTCSS, “ENC DEC” will appear on the display; in the case of
DCS, “DCS” will appear on the display.
2. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
3. Rotate the DIAL knob to select Menu #44 (TN FRQ)
when CTCSS is selected, or Menu #9 (DCS.COD) dur-
ing DCS operation.
4. Press the
[
BAND
(
SET
)]
key to enable adjustment of
the selected Menu Item.
5. Press the
[
SCAN
(
SEL
)]
key momentarily to start scan-
ning for the incoming CTCSS or DCS tone/code.
6. When the radio detects the correct tone or code, it will
halt on that tone/code, and audio will be allowed to pass.
Press the
[
BAND
(
SET
)]
key momentarily to lock in that
tone/code, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to save the new setting and exit to
normal operation.
If the Tone Scan feature does not detect a tone or code, it will continue to scan
indefinitely. When this happens, it may be that the other station is not sending any
tone. You can press the [SCAN(SEL)] key to halt the scan at any time.
Tone Scanning works either in the VFO or Memory modes.
CTCSS/DCS OPERATION
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info