35970

Yaesu FT-60R Manual

51
Zoom out
Zoom in
Previous page
1/84
Next page
FT-60R OPERATING MANUAL 49
The FT-60R can be used to access a “node” (repeater or base station) which is tied into the
Vertex Standard WIRES™ (Wide-Coverage Internet Repeater Enhancement System) net-
work, operating in the “SRG” (Sister Radio Group) mode. Details may be found at the
WIRES-II Web site: http://www.vxstd.com/en/wiresinfo-en/. This feature may also be used
to access other systems, as described below.
1. Press the
[
0
( )
SET
]
key momentarily to activate the Internet
Connection feature. The “ ” icon will appear in the upper right
corner of the display.
2. Press and hold in the
[
0
( )
SET
]
key for one second, then rotate the DIAL knob to
select the access number (ICOD “0” ~ “9,” “A,” “B,” “C,” “D,” “E (),” “F (#),”)
corresponding to the WIRES™ node to which you wish to establish an Internet link
(ask the node or repeater owner/operator if you don’t know the
access number in the network). Now press the PTT switch to
exit from the selection mode.
3. With the Internet Connection feature activated (as in step 1 above), the FT-60R will
generate a brief (0.1 second) DTMF tone according to your selection in step 2. This
DTMF tone is sent at the beginning of every transmission to establish or maintain the
link to the local WIRES™ node operating in the SRG mode.
4. To disable the Internet Connection feature, press the
[
0
( )
SET
]
key momentarily
(the “ ” icon will disappear from the display).
If other users report that you always have a DTMF “beep” at the beginning
of each transmission, and you are not operating in conjunction with Internet
access, disable this function via step (4) above.
You may access other Internet Link Systems (including WIRES™ in the “FRG” mode)
that use a DTMF string for access.
1. Load the DTMF tones which you wish to use for Internet-link access into a DTMF
Autodial memory register. For purposes of this example, we will use “#123” as the
access code.
A. Press the
[
F/W
]
key, then press the
[
0
( )
SET
]
key to enter the Set mode.
B. Rotate the DIAL knob to select Set Mode Item 17: DT WRT.
C. Press the
[
F/W
]
key to enable adjustment of this Set Mode
Item.
D. Rotate the DIAL knob to select the DTMF Memory register
into which you wish to store the access code.
E. Press the
[
F/W
]
key momentarily. The first digit will blink.
F. Rotate the DIAL knob to select “F” (representing DTMF
“#”: the first digit of the DTMF string).
G. Press the
[
F/W
]
key momentarily to accept the first digit
and move to the second digit of the DTMF string.
INTERNET CONNECTION FEATURE
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-60R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-60R in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info