444588
84
Zoom out
Zoom in
Previous page
1/104
Next page
Page 82 FT-450 OPERATION MANUAL
MIC EQ
Function: Setting of the DSP microphone equalizer
Available Values: 0 ~ 9
Default: 0
You may select one of ten available DSP equaliza-
tion techniques for transmitted microphone audio.
0: Flat
1: Low-frequency component is decreased.
2: Mid-frequency component is decreased.
3: High-frequency component is decreased.
4: High-frequency component is enhanced.
5: Mid-frequency component is enhanced.
6: Low-frequency component is enhanced.
7: Low-frequency component is enhanced and High-
frequency component is decreased.
8: Low-frequency component is decreased and Mid-
frequency component is enhanced.
9: Low-frequency component is decreased and High-
frequency component is enhanced.
MICGAIN
Function: Setting of the MIC gain
Available Values: LOW / NOR / HIGH
Default: NOR
Adjusts the microphone gain level for SSB/AM/FM.
LOW: When the microphone input is high the speech
processor is turned off automatically.
NOR: For normal voice the speech processor is
turned on automatically.
HIGH: When the microphone input is low the speech
processor is turned on automatically.
MICSCAN (MIC AUTO SCAN)
Function: “ON/OFF” of microphone scanning func-
tion
Available Values: ON/OFF
Default: ON
Enables/disables scanning access via the
microphone’s
[
UP
]
/
[
DWN
]
keys.
OFF: The frequency or the memory channel is
scanned only while
[
UP
]
/
[
DWN
]
button is be-
ing pushed. The scanning stops when
[
UP
]
/
[
DWN
]
button is released.
ON: When
[
UP
]
/
[
DWN
]
button is held for about 1.0
second, the scanning continues even after the
button is released.
MY BAND
Function: Setting of the my band
Available Values: ON/OFF
Default: ON
The “My Bands” feature allows you to select several
Amateur bands, and make only those bands avail-
able for selection via the
[
BAND
]
/
[
BAND
]
but-
tons.
ON: Only the bands that are turned on will be shown
when pushing the
[
BAND
]
/
[
BAND
]
switch.
OFF: A Band that is turned off will not appear when
the
[
BAND
]
/
[
BAND
]
switch is pushed.
NOTE:
The band presently in use and the General band can-
not be turned off.
MY MODE
Function: Setting of my mode
Available Values: ON/OFF
Default: ON
The “My Mode” feature allows you to select an oper-
ating mode, and set whether or not the mode will be
displayed or skipped when the
[
MODE
]
/
[
MODE
]
buttons are pressed.
This feature can be very useful in HF operation, when
the AM/FM/DATA modes are not used.
ON: Only the mode registered by turning on can be
selected by pushing
[
MODE
]
/
[
MODE
]
switch.
OFF: A mode that is turned off will not be appear
when pressing the
[
MODE
]
/
[
MODE
]
switch.
NOTE:
The mode displayed on the display while setting “My
mode” cannot be turned off.
P M-DWN (MIC-DWN PG)
Function: One of 52 functions can be preset and
assigned to the
[
DWN
]
key of the microphone.
Available Values: Please see page 16.
Default: DOWN
Presets of various functions can be assigned to the
DOWN key of the microphone using this option.
P M-FST (MIC-FAST PG)
Function: One of 52 functions can be preset and
assigned to the
[
FST
]
key of the microphone.
Available Values: Please see page 16.
Default: N/A
Presets of various functions can be assigned to the
[
FST
]
key of the microphone using this option.
MENU MODE
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info