444588
61
Zoom out
Zoom in
Previous page
1/104
Next page
Page 59FT-450 OPERATION MANUAL
M
EMORY
O
PERATION
Erasing Memory Channel Data
1. Press the
[
MW/V/M
]
button, if necessary, to enter
the Memory mode.
2. Press the
[
F
]
button followed by the
[
MW/V/M
]
button.
The blinking current memory channel number will
be shown on the display, and the contents of the
current memory channel will be shown on the dis-
play.
3. Rotate the
[
DSP/SEL
]
knob to select the memory
channel that you would like to erase.
4. Press the
[
CLAR
]
button to erase the contents of
the selected memory channel.
5. Press the
[
MW/V/M
]
button momentarily to erase
the selected memory channel. The display will
revert to memory channel 1.
AD VICE:
After erasure, only the memory channel number will
remain. The frequency data will disappear from the
display.
If you make a mistake and wish to restore the
memory’s contents, just repeat above steps.
Memory Tune Operation
You may freely tune off of any memory channel in the
“Memory Tune” mode, this is similar to VFO opera-
tion. So long as you do not over-write the contents of
the current memory, Memory Tune operation will not
alter the contents of the memory channel.
1. Press the
[
MW/V/M
]
button, if necessary, to enter
the Memory mode.
2. Rotate the
[
MAIN DIAL
]
knob. You will now ob-
serve that the memory channel’s frequency is
changing.
The “M-TUNE” notation will replace the Memory
Channel Number, indicating you are in the
“Memory Tune” mode.
During Memory Tune operation, you may change
operating modes, and engage and offset the Clari-
fier, if desired.
3. Press the
[
MW/V/M
]
button momentarily to return
to the originally-memorized frequency of the cur-
rent memory channel. One more press of the
[
MW/V/M
]
button will return you to VFO opera-
tion.
[
DSP/SEL
]
Knob
[
MW
/V/M
]
button
REGULAR MEMORY OPERATION
[
F
]
button
[
CLAR
]
button
[
MAIN DIAL
]
Knob
[
MW/V/M
]
button
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info