444588
55
Zoom out
Zoom in
Previous page
1/104
Next page
Page 53FT-450 OPERATION MANUAL
REPEATER OPERATION
The FT-450 may be operated on 29 MHz and 50 MHz repeaters. Use this procedure to set the repeater shift
direction, and the CTCSS squelch mode & tone.
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “EXT MNU”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment of
this menu item. The “ ” icon will be blinking.
4. Rotate the
[
DSP/SEL
]
knob to select “ON” to ex-
pand the menu items.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
6. Rotate the
[
DSP/SEL
]
knob to select the menu
item “RPT”.
7. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will change
to blink.
8. Rotate the
[
DSP/SEL
]
knob to select the desired
repeater shift direction. Available selections are
–SHIFT, SIMPLEX, and +SHIFT.
9. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
10. Rotate the
[
DSP/SEL
]
knob to select the menu
item “SQL TYP”.
11. Press the
[
DSP/SEL
]
knob to enable adjustment of
this menu item. The “ ” icon will be blinking.
12. Rotate the
[
DSP/SEL
]
knob to select the desired
CTCSS mode. If you just need to send the uplink
encoding tone, select “ENC”. For encode/decode
operation, choose “ENC DEC” instead.
13. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
14. Rotate the
[
DSP/SEL
]
knob to select the menu
item “TONE F”.
15. Press the
[
DSP/SEL
]
knob to enable adjustment of
this menu item. The “ ” icon will be blinking.
16. Rotate the
[
DSP/SEL
]
knob to select the desired
CTCSS tone to be used. A total of 50 standard
CTCSS tones are provided.
17. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
18. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
19. Rotate the
[
MAIN DIAL
]
to the output frequency
(downlink) from the repeater.
20. Close the microphone’s PTT switch to begin
transmission. You will observe that the frequency
has shifted to correspond to the programming you
set up in the previous steps. Speak into the mi-
crophone in a normal voice level, and release the
PTT switch to return to the receive mode.
FM MODE OPERATION
AD VICE:
The conventional repeater shift used on 29 MHz is
100 kHz, while on the 50 MHz band the shift may
vary between 500 kHz and 1.7 MHz (or more). To
program the proper repeater shift, use Menu Item
RPT SFT”.
[
F
]
button
[
DSP/SEL
]
knob
[
MAIN DIAL
]
knob
CTCSS TONE FREQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 251.4
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info