444588
51
Zoom out
Zoom in
Previous page
1/104
Next page
Page 49FT-450 OPERATION MANUAL
CW PITCH ADJUSTMENT
You may adjust the center frequency of the receiver passband, as well as the pitch of your offset CW carrier via
the Menu Item “CWPITCH”. Available tone selections are 400 Hz through 800 Hz, in 100 Hz step.
CW MODE OPERATION
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “CWPITCH”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
4. While pressing and holding the
[
METER/DIM
]
but-
ton, rotate the
[
DSP/SEL
]
knob to set the desired
pitch frequency.
(You may press the
[
HOME/RCL
]
button to reset
the pitch frequency to the factory default.)
5. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
6. Press and hold the
[
F
]
button for one second to
save the new setting and return to normal opera-
tion.
CW TRAINING FEATURE
The FT-450 provides a unique CW Training feature, which sends random Morse Code five-character groups via
the sidetone (heard in the speaker), so you can improve your CW proficiency whether or not the bands are open.
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “CWTRAIN”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
4. Rotate the
[
DSP/SEL
]
knob to select the training
mode:
N: Numeric character only
A: Alphabet character only
M: Numeric and Alphabet characters (Mixed)
5. Press the
[
F
]
button to begin generation of the
five character code groups (CW sidetone only,
does not key the transmitter).
6. When the code group is completed, the “Answer”
will appear on the display.
7. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
8. Press the
[
F
]
button to generate another code
group, as above.
9. To disable the CW Training feature, press and
hold the
[
F
]
button for one second to return to
normal operation.
NOTE:
You may adjust the Morse Speed via Menu Item
CWSPEED”.
You may adjust the sidetone volume level via
Menu Item “CWSTONE”.
[
F
]
button
[
DSP/SEL
]
knob
[
HOME/RCL
]
button
[
F
]
button
[
METER/DIM
]
button
[
DSP/SEL
]
knob
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info