444588
48
Zoom out
Zoom in
Previous page
1/104
Next page
Page 46 FT-450 OPERATION MANUAL
SETTING THE KEYER WEIGHT
(
DOT/SPACE:DASH
)
RATIO
The Menu Item “CWWEIGHT” may be used to adjust the Weight for the built-in Electronic Keyer. The default
weighting is 3:1 (a dash is three times longer than a dot or space).
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “EXT MNU”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “
” icon will be blink-
ing.
4. Rotate the
[
DSP/SEL
]
knob to select “ON” to ex-
pand the menu items.
5. Press the
[
DSP/SEL
]
knob. The “
” icon re-
turns to appear continuously.
6. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
7. Press and hold the
[
F
]
button for one second to
enter the Menu mode again. The “ ” icon
will appear on the display.
8. Rotate the
[
DSP/SEL
]
knob to select the menu
item “CWWEIGHT”.
9. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will change
to blink.
10. Rotate the
[
DSP/SEL
]
knob to set the desired
keyer weight value. Available adjustment range
is for a Dot/Space:Dash ratio of “2.5” - “4.5” (de-
fault value: “3.0”).
(You may press the
[
HOME/RCL
]
button to reset
the keyer weight value to the factory default.)
11. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
12. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
USING THE BUILT-IN ELECTRONIC KEYER
SELECTING THE KEYER PADDLE
S WIRING CONFIGURATION
You may select “normal” or “reverse” paddle polarity via Menu Item “CW KEY”. The default setting is “normal”,
whereby the “Tip” connection on the key plug is “Dot” and the “Ring” connection is “Dash”.
[
HOME/RCL
]
button
[
F
]
button
[
DSP/SEL
]
knob

To change the paddle polarity:
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “EXT MNU”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
4. Rotate the
[
DSP/SEL
]
knob to select “ON” to ex-
pand the menu items.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
6. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
7. Press and hold the
[
F
]
button for one second to
enter the Menu mode again. The “ ” icon
will appear on the display.
8. Rotate the
[
DSP/SEL
]
knob to select the menu
item “CW KEY”.
9. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
10. Rotate the
[
DSP/SEL
]
knob to set the “REV” (de-
fault: “NOR”).
(You may Press the
[
HOME/RCL
]
button to reset
the paddle polarity to the factory default.)
11. Press the
[
DSP/SEL
]
knob. The “ ” icon re-
turns to appear continuously.
12. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
[
HOME/RCL
]
button
[
F
]
button
[
DSP/SEL
]
knob
CW MODE OPERATION
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info