444588
31
Zoom out
Zoom in
Previous page
1/104
Next page
Page 29FT-450 OPERATION MANUAL
SHIFT
(
INTERFERENCE REJECTION “SIGNALS WITHIN 3 KHZ
)
IF Shift allows you to vary the DSP filter passband higher or lower, without changing the pitch of the incoming
signal, so as to reduce or eliminate interference. Because the carrier tuning frequency is not varied, there is no
need to re-tune the operating frequency when eliminating the interference. The total passband tuning range for
the IF Shift system is ±1 kHz.
CONVENIENCE FEATURES
Rotate the
[
SHIFT
]
knob to the left or right to reduce
the interference.
You may observe the position of the passband in the
SHIFT” indicator of the DSP Graphic Display on the
display.
“SHIFT” Indicator
[
SHIFT
]
knob
[
SHIFT
]
KNOB FULLY COUNTER-CLOCKWISE
[
SHIFT
]
KNOB 12 O
CLOCK POSITION
[
SHIFT
]
KNOB FULLY CLOCKWISE
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
Desired Signal Desired Signal Desired Signal
QRMQRM
-SHI FT+ -SH IFT + -SHI FT +
Referring to Figure “A”, note the depiction of
the IF DSP filter as the thick line, with the
[
SHIFT
]
knob in the 12 o’clock position. In
Figure “B”, an interfering signal has appeared
inside the original passband. In Figure “C”,
you can see the effect of rotating the
[
SHIFT
]
knob to reduce the interference level by mov-
ing the filter passband so that the interfer-
ence is outside of the passband.
A B C
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info