444588
28
Zoom out
Zoom in
Previous page
1/104
Next page
Page 26 FT-450 OPERATION MANUAL
NOISE BLANKER
(
INTERFERENCE REJECTION “SIGNALS WITHIN 3 KHZ
)
The FT-450 includes an effective Noise Blanker, which can significantly reduce noise caused by automotive
ignition systems.
ATT/IPO
(
ADJUST THE RECEIVING SENSITIVITY
)
You may reduce the receiving signal strength to 20 dB when extremely strong local signals or high noise de-
grade reception. You may optimize the characteristics of the receiver front-end, for best reception, depending on
the noise levels and the signal strengths.
Press the
[
ATT/IPO
]
button several times to set the
desired selection, per the chart below.
The selection will be indicated in the Block Diagram
on the display.
ATT: OFF, IPO: OFF Attenuator is OFF, and the incoming
signal is amplified by the RF preampli-
fier.
ATT: ON, IPO: OFF Attenuator is ON, (the incoming signal
is reduced by 20 dB) and the incom-
ing signal is amplified by the RF pream-
plifier.
ATT: OFF, IPO: ON Attenuator is OFF, and the incoming
signal bypasses the RF preamplifier,
yielding direct feed to the first mixer.
ATT: ON, IPO: ON Attenuator is ON, (the incoming signal
power is reduced by 20 dB) and the
incoming signal bypasses the RF
preamplifier, yielding direct feed to the
first mixer.
Block Diagram
[
ATT/IPO
]
button
CONVENIENCE FEATURES
1. Press the
[
NB
]
button to activate the Noise
Blanker.
2. Press the
[
NB
]
button again to disable the Noise
Blanker.
The selection will be indicated in the Block Diagram
on the display.
Block Diagram
[
NB
]
button
NOTE
An attenuator is always “ON” between 30kHz
and 1.7MHz.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info