444588
18
Zoom out
Zoom in
Previous page
1/104
Next page
Page 16 FT-450 OPERATION MANUAL
HOW TO USE THE
[
VOICE/C.S
]
SWITCH
You may set the
[
VOICE/C.S
]
button function to one of 52 functions via Menu Item “PNL-C.S”.
To assign a function to the [VOICE/C.S] button:
1. Press and hold the
[
F
]
button for one second to enter the
Menu Mode. The “ ” icon will appear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select Menu Item “PNL-C.S”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment of
this Menu Item. The “ ” icon will be blinking.
4. Rotate the
[
DSP/SEL
]
knob to select the desired function.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon returns
to appear continuously.
6. Press and hold the
[
F
]
button for one second to return
to normal operation.
[
VOICE/C.S
]
button
[
F
]
button
[
DSP/SEL
]
knob
EASY OPERATION
Item Function
MONI Activates the Monitor function.
N/A No Function.
P/B Activates the Digital Voice Recorder.
PLAY1 Send the CW message, which is memorized in BEACON TEXT 1.
PLAY2 Send the CW message, which is memorized in BEACON TEXT 2.
PLAY3 Send the CW message, which is memorized in BEACON TEXT 3.
QSPL Activates Quick Split Operation
SPOT Generates a CW Spot Tone while pressing the
[
VOICE/C.S
]
button when using CW mode.
SQLOFF Opens the noise squelch while pressing the
[
VOICE/C.S
]
button.
SWR Transmits a 10 watts carrier (CW mode) to measure the SWR ratio while pressing the
[
VOICE/C.S
]
button.
TXW Monitor the transmit frequency while pressing the
[
VOICE/C.S
]
button when Split Frequency operation is engaged.
VCC Display the DC supply voltage while pressing the
[
VOICE/C.S
]
button.
VOICE2 Announces the current S-meter reading, operating frequency (with resolution to the displayed 100 Hz digit), and
operating mode.
VM1MONI Play back the voice message, which is memorized in Voice Memory 1.
VM1REC Store the voice message into Voice Memory 1.
VM1TX Send the voice message, which is memorized in Voice Memory 1.
VM2MONI Play back the voice message, which is memorized in Voice Memory 2.
VM2REC Store the voice message into Voice Memory 2.
VM2TX Send the voice message, which is memorized in Voice Memory 2.
DOWN Decreases the VFO frequency by one step or moves the memory channel to the next-lowest channel while pressing
the
[
VOICE/C.S
]
button.
FAST Set to the same function as the front panel’s
[
FAST
]
button.
UP Increases the VFO frequency by one step or moves the memory channel to the next-highest channel while pressing
the
[
VOICE/C.S
]
button
DSP Set to the same function as the front panel’s
[
DSP
]
button.
ATT/IPO Set to the same function as the front panel’s
[
ATT/IPO
]
button.
NB Set to the same function as the front panel’s
[
NB
]
button.
AGC Set to the same function as the front panel’s
[
AGC
]
button.
MODEDN Set to the same function as the front panel’s
[
MODE
]
button.
MODEUP Set to the same function as the front panel’s
[
MODE
]
button.
DSP/SEL Set to the same function as the front panel’s
[
DSP/SEL
]
button.
KEYER Set to the same function as the front panel’s
[
KEYER
]
button.
CLAR Set to the same function as the front panel’s
[
CLAR
]
button.
BANDDN Set to the same function as the front panel’s
[
BAND
]
button.
BANDUP Set to the same function as the front panel’s
[
BAND
]
button.
A=B Set to the same function as the front panel’s
[
A=B
]
button.
A/B Set to the same function as the front panel’s
[
A/B
]
button.
LOCK Set to the same function as the front panel’s
[
LOCK
]
button.
TUNE Set to the same function as the front panel’s
[
TUNE
]
button.
VOICE Announce the current operating frequency
(
with resolution to the displayed 100 Hz digit
)
and operating mode.
MW Copies the current operating data from the VFO into the currently selected memory channel.
V/M Toggles frequency control between VFO and memory system.
HOME Recall the “Home”
(
favorite frequency
)
channel.
RCL Recall the QMB
(
Quick Memory Bank
)
memory.
VOX Activate the VOX
(
automatic voice-actuated transmitter switching
)
feature.
STO Copies operating data into QMB
(
Quick Memory Bank
)
Memory.
STEP Enables the setting of the frequency step of the
[
DSP/SEL
]
knob by the
[
DSP/SEL
]
knob.
SPLIT Activates split frequency operation between VFO-A and VFO-B.
PMS Engages Programmable Memory Scan
(
PMS
)
.
SCAN Initiates the upward scanning of VFO frequencies or memory channels
)
.
MENU Engage the “Menu” mode.
DIMMER Enables adjustment of the display dimmer level by the
[
DSP/SEL
]
knob.
MTR Change the meter function in the transmit mode.
USER This parameter is for future expansion of the transceiver’s capabilities. Do not select this parameter.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info