444588
5
Zoom out
Zoom in
Previous page
1/104
Next page
Page 3FT-450 OPERATION MANUAL
AGC BAND BAND TUNE F
SQL/RF GAIN AF GAIN
A/B
LOCKFAST
A=B
M
ODE
C
LAR
SPLIT
STEP
SCAN
PMS
RCL
STO
VOX
V/M
F
RONT
P
ANEL
S
WITCHES
AND
K
NOBS
VOICE/C.S Switch
Press this button to activate one of the 52 functions, which
can be assigned via Menu Item “PNL-C.S.”
Press the
[
F
]
button followed by this button to announce the
current operating frequency (with resolution to the displayed
100 Hz digit) and operating mode.
TUNE Switch
Press this button momentarily to
toggle the ATU-450 Internal Automatic
Antenna Tuner on/off.
Press and hold in this button to begin
the automatic Tuning.
F Switch
Press this button to activate the alternate key
functions of the six command buttons located
on the upper right corner of the front panel.
Press and hold this button for one second to
engage the “Menu” mode.
METER/DIM Switch
Press this button to change the meter
function in the transmit mode as fol-
lows.
PO ALC SWR PO
PO: Indicates the average power
output level.
ALC: Indicates the relative ALC volt-
age.
SWR:Indicates the Standing Wave
Ratio (Forward/Reflected).
Press the
[
F
]
button followed by this
button to enable adjustment of the
display dimmer level by the
[
DSP/
SEL
]
knob. When the adjustment is
complete, press this key again.
HOME/RCL Switch
Press this button to recall the Quick Memory Bank
memory for operation. Press this button again to
return to the VFO or Memory mode.
Press the
[
F
]
button followed by this button to recall
the “Home” (favorite frequency) channel. The home
channel default settings are 29.30000 MHz for the
HF Band and 51.00000 MHz for the 6 m band.
STEP/SPLIT Switch
Press this button to activate split fre-
quency operation between VFO-A,
used for reception and VFO-B, used
for transmission (or vice versa).
Press the
[
F
]
button followed by this
button to enable setting of the fre-
quency step with the
[
DSP/SEL
]
knob.
When the selection is complete, press
this key again.
MW/V/M Switch
This button toggles frequency control between the
VFO and the memory system.
Press the
[
F
]
button followed by this button to copy
the current operating data from the VFO into the cur-
rently selected memory channel.
VOX/STO Switch
Press this button to copy the operating in-
formation (frequency, mode, bandwidth,
and also repeater direction/shift frequency
and CTCSS functions on the FM mode) into
the Quick Memory Bank.
Press the
[
F
]
button followed by this button
to activate the VOX (voice-actuated trans-
mitter switching) feature in the SSB, AM,
and FM modes.
PMS/SCAN Switch
Press this button to initiate the
upward scanning of VFO fre-
quencies or memory chan-
nels.
Press the
[
F
]
button followed
by this button to engage the
Programmable Memory Scan,
(PMS) which limits scanning
within a particular frequency
range.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info