478472
16
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL12
AUTOMATIC POWER-OFF
(
APO
)
FEATURE
The APO feature helps conserve battery life by automatically turning the radio off after a
user-defined period of time within which there has been no dial or key activity. The avail-
able selections for the time before power-off are 0.5/1/3/5/8 hours, as well as APO Off.
The default condition for the APO is OFF, and here is the procedure for activating it:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #11 (“
APOAPO
APOAPO
APO”).
e
Press the
[
F/L
]
key to enable adjustment of this Menu item.
f
Rotate the DIAL to select the desired time period after which the radio will automati-
cally shut down.
g
Once you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
CHECKING THE BATTERY VOLTAGE
The FT-250R is capable of measuring the current battery voltage.
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #37 (“
BATTBATT
BATTBATT
BATT”).
e
Press the
[
F/L
]
key to check the battery voltage.
f
To return to normal operation, press the
[
F/L
]
key, then press the PTT.
DISABLING THE BUSY/TX LED
Further battery conservation may be accomplished by disabling the BUSY/TX LED. Use
the following procedure:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #12 (“
TRX LEDTRX LED
TRX LEDTRX LED
TRX LED”).
e
Press the
[
F/L
]
key to enable adjustment of this Menu item.
f
Rotate the DIAL to set this Menu item to OFF (thus disabling the BUSY/TX LED).
g
Press the PTT key to save the new setting and exit to normal operation.
BUSY CHANNEL LOCK-OUT
(
BCLO
)
The BCLO feature prevents the radio’s transmitter from being activated if a signal strong
enough to break through the “Noise” squelch is present. The default setting for the BCLO
is OFF, and here is how to change that setting:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #23 (“
BCLOBCLO
BCLOBCLO
BCLO”).
e
Press the
[
F/L
]
key to enable adjustment of this Menu item.
f
Rotate the DIAL to set the BCLO feature to the “ON” position.
g
Press the PTT key to save the new setting and resume normal operation.
Advanced Operation
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info