674722
23
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual 21
8. Set up DP-ID
Digital Personal Identication
(
DP-ID
)
Digital Personal Identification (DP-ID) is the digital ID number each transceiver is programmed with. The
system manager may operate the DR-2X/DR-2XE repeater functions, and the emergency communication, by
registering the DG-ID number of the controlling C4FM digital transceiver to the DR-2X/DR-2XE.
When receiving the uplink signal containing the DP-ID that is registered to the DR-2X/DR-2XE, the signal is
received and transmitted on the downlink preferentially. In addition, if connecting multiple repeaters via the
Internet, signals containing the registered DP-ID will be transmitted on the multiple repeater downlinks (the
local repeater signals may also be transmitted on the downlink.).
z DP-ID feature
Emergency Transmission Feature
When the DR-2X/DR-2XE receives a signal from a transceiver with a registered DP-ID, the DR-2X/DR-2XE
operates in preference to all operations.
When the repeater DP-ID setting is ON, the signal containing a DP-ID from a C4FM transceiver may be
registered in the repeater DP-ID log.
1 Touch
[
A SETUP
]
or
[
B SETUP
]
to display the frequency set up screen, then touch
[
F
]
on the bottom of the
screen.
2 Touch
[
ID MODE
]
to select the “DP-ID”.
Touching
[
ID MODE
]
switches the setting as follows:
à “DP-ID” à “DG-ID” à “DP-ID” à
The DP-ID display returns to the DG-ID display in about 5 seconds.
3 Keep touching
[
ID MODE
]
(DP-ID) for more than two seconds.
The DP-ID list screen appears.
8
4
DG-ID
T-OFF
R-OFF
SETUP RXx.xx TX .xSETUP RXx.xx TX .x
4 Touch
[
REG
]
.
The Registration Confirmation Screen appears for about 5 seconds.
5 Tune the registering transceiver to the repeater frequency, then trans-
mit in the C4FM mode.
The call sign and Radio ID from the received transceiver are dis-
played.
DTMF
*1111
*2222
*3333
*4444
CONTROL MODE
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
DP-ID Registrasion?
6 Touch
[
OK?
]
to register Radio ID, or touch
[
Cancel
]
to return to the
DP-ID list screen without registering.
If registering another transceiver, repeat step 4 to 6.
Up to 30 DP-ID information data may be registered.
7 Touch
[
BACK
]
3 times.
The screen returns to the operation mode screen.
DTMF
*1111
*2222
*3333
*4444
CONTROL MODE
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
O K ? Cance
DP-ID Registration
Radio ID:xxxxxFT2DR
DTMF
*1111
*2222
*3333
*4444
1
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
F T 2 D R x x x x x
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2X in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info