674722
12
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual10
2. Set up Operation Mode
When the Power Switch is turned ON, Operation Mode screen appears.
This screen is for normal operation.
The DR-2X/DR-2XE could be set up with two frequencies for the uplink and the downlink and also different
operation modes for each frequency.
Normal Dual CH Operation
In Normal Duel Channel Operation, the DR-2X/DR-2XE accepts the uplink channel on a first come basis, and
the later signal on the other channel is not repeated until the first channel is released.
Priority Dual CH Operation
In Priority Dual Channel Operation, the DR-2X/DR-2XE always repeats the Priority Channel, regardless of any
signals on the other channel (see page 13 “Priority Channel”).
To setup priority CH, touch the area between RX and TX on the channel you want to set the priority channel.
To reset, touch the area again.
Single CH Operation
If you do not need the second CH on DR-2X/DR-2XE, just enter any frequency on CH-B and do not connect
the uplink antenna to RX ANT B.
CH-B can be used exclusively for repeater control without any repeater operation. In this case, the downlink
frequency of CH-B is not displayed.
To setup CH-B for control only, touch the area between RX and TX on the CH-B until CNTL appears.
To reset, touch the area again.
CH - B
CH - A
TX
(
downlink
)
RX
(
uplink
)
TX
(
downlink
)
RX
(
uplink
)
To receive Analog FM and Digital C4FM signals simultaneously, set RX to
[
AUTO
]
mode.
This mode may activate the AMS (Automatic Mode Select) function, then receive (uplink) and transmit
(downlink) signals of the Analog FM and Digital C4FM. The default setting is
[
AUTO
]
.
If operating the repeater using the DG-ID and connecting multiple repeaters, select the
[
DIGITAL
]
in the
[
FIX
]
mode.
The DG-ID function is not available because the Analog FM mode does not include the DG-ID information.
In the C4FM digital mode, three digital modes are recognized automatically. In normal C4FM digital, it will be
in V/D mode.
Touch
[
AUTO
]
or
[
FIX
]
in the operation mode screen area to set the operating mode.
[
AUTO
]
Touch here to activate the AMS function. The mode switches automatically according to the
received/transmitted signal types.
[
AUTO
]
is turned red,
[
DIGITAL
]
automatically light up.
[
FIX
]
Touch here to activate the FIX mode.
[
FIX
]
is turned yellow.
Note that when selecting the [FIX]
mode, that other mode signals may not be received.
Either
[
VOICE WIDE
]
or
[
DATA
]
modes are automatically recognized in the C4FM uplink Signal, and receive
mode is changed to fit the signals, so no setting is necessary.
[
DIGITAL
]
Normal C4FM digital mode
[
VOICE WIDE
]
High-rate voice C4FM digital mode
[
DATA
]
High-speed data C4FM digital mode
[
FM
]
Analog FM communication mode
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2X in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info