478460
4
Zoom out
Zoom in
Previous page
1/56
Next page
DMU-2000 DATA MANAGEMENT UNITPage 2
1. Make certain that all cables are disconnected from the
transceiver.
2. Referring to Figure 1, remove the 18 screws that at-
tach the bottom case, then remove the bottom case.
3. Refer to Figure 2 for the mounting location of the
SCOPE Unit. There is a disconnected 14-pin plug.
4. Mount the SCOPE Unit using the supplied four screws
(Figure 3).
5. Referring to Figure 3, plug the 14-pin plug which was
removed from the chassis in the previous step into
connector J7002 on the SCOPE Unit.
6. Locate the Coaxial plug
(
labeled
)
installed in jack
(J4006) on the LOCAL Unit. Unplug the Coaxial plug
( )
from the LOCAL Unit and plug it into J7003 on
the SCOPE Unit. Similarly, locate the Coaxial plug
(
labeled
)
installed in jack (J1029) on the MAIN
Unit. Unplug the Coaxial plug
( )
from the MAIN
Unit and plug it into J7003 on the SCOPE Unit.
7. Referring to Figure 4, place the Coaxial cables into
the slots of the chassis.
8. Replace the bottom case and its 18 screws.
9. Assemble the transceiver, Data Management Unit, af-
ter-market Display, and after-market Keyboard (if
used) pursuant to Figure 5.
FIGURE 1
FIGURE 2
SCOPE Unit Mounting Location
14-pin plug
FIGURE 3 FIGURE 4
Move the Coaxial plug
Move the Coaxial plug
Plug the 14-pin plug
Place the Coaxial cables into the slots of the chassis
INSTALLATION AND CONNECTION
FT-950
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DMU-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DMU-2000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info