606334

Xterra SB2.5 RECUMBENT BIKE Manual

18
Zoom out
Zoom in
Previous page
1/20
Next page
16
SB2.5 Recumbent Bike
Setting Parameters for the Target Heart Rate Program
Select Target HR using UP / DOWN KEY then press ENTER KEY. The rst parameter “Time” will ash indicat-
ing the value can be adjusted using UP / DOWN KEY. Press ENTER KEY to save value & move to next param-
eter to be adjusted. **(If user sets up the target time to workout, then the next parameter of Distance can
not be adjusted) Continue through all desired parameters, pressing START / STOP to start workout.
Note: If your Pulse measurement is above or below (± 5) the TARGET HR setting, the
computer will adjust the resistance load automatically; it will check approximately every 10 seconds. If the heart
rate signal disappears, the computer will keep the resistance load
constant for 60 seconds then it will decrease the resistance load 1 level every 10s.
When any one of the workout parameters counts down to zero the console emits a beep sound and the workout
stops automatically. Press START KEY to continue the workout to reach the unnished workout goals set.
Target Heart Rate Program
Heart Rate Control Program
There are 4 selections for target pulse:
HRC- 55% TARGET H.R= 55% of (220-AGE)
HRC - 65% TARGET H.R= 65% of (220-AGE)
HRC - 75% TARGET H.R= 75% of (220-AGE)
HRC - 85% TARGET H.R= 85% of (220-AGE)
Setting Parameters for Heart Rate Control Programs
Select one of the Heart Rate Control Programs using UP / DOWN KEY then press
ENTER KEY. The rst parameter “Time” will ash indicating the value can be adjusted using UP / DOWN KEY.
Press ENTER KEY to save value & move to next parameter to be
adjusted. **(If user sets up the target time to workout, then the next parameter of
Distance can not be adjusted) Continue through all desired parameters, pressing START / STOP to start work-
out.
Note: If your Pulse measurement is above or below (± 5) the Target HR setting, the
computer will adjust the resistance load automatically; it will check approximately every 10 seconds. If the heart
rate signal disappears, the computer will keep the resistance load
constant for 60 seconds then it will decrease the resistance load 1 level every 10 seconds.
When any one of the workout parameters counts down to zero the console emits a beep sound and the workout
stops automatically. Press START KEY to continue the workout to reach the unnished workout goals set.
… 18


Need help? Post your question in this forum.

Forumrules
1

Forum

xterra-sb2.5-recumbent-bike

Reset search

  • My bike shuts down after 4 minutes. Obviously, a timer of some sort is set. How do I eliminate this setting? Submitted on 4-9-2022 at 03:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xterra SB2.5 RECUMBENT BIKE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xterra SB2.5 RECUMBENT BIKE in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info